MIL-HDBK-115 Us Army Reverse Engineering Handbook Guidelines And ProceduresThis HANDBOOK, which provides the guidelines and procedures for performing reverse engineering, was created using current applicable laws and knowledge gained during a trial program from July 1985 to April 1987, and is based on experiences obtained from military and industry participants. This handbook is for guidance only and cannot be cited as a requirement.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78

APPENDIX D

TEST PLAN

NOMENCLATURE: NSN:

DATE:

1.0       PURPOSE

The purpose of this Test Plan is to ensure that the (nomenclature) conforms to the contractual requirements, applicable Government Standards and Specifications, and the Technical Data Package (TDP) developed for competitive procurement.

2.0       REFERENCE DOCUMENTS

(number and title)

No.                    , Acceptance Test Procedure for (nomenclature) ISO 10012-1 and NCSL-Z540.1, Calibration System Requirements

3.0       DEFINITION OF TEST PLAN

3.1       Introduction

The     (nomenclature)   will be tested as an (assembled unit - or - subassemblies - or component parts) in accordance with the Acceptance Test Procedure (ATP), No.             , developed as part of this Test Plan.

3.2       Definition of Terms

TDP - Technical Data Package

ATP - Acceptance Test Procedure

3.3       Test Schedule

Each                 (nomenclature)           manufactured to the Technical Data Package (TDP)

will be tested upon receipt from the supplier.

FIGURE 3:  Sample test plan format (see 5.10). (Page 1 of 3)

61