MIL-HDBK-115 Us Army Reverse Engineering Handbook Guidelines And ProceduresThis HANDBOOK, which provides the guidelines and procedures for performing reverse engineering, was created using current applicable laws and knowledge gained during a trial program from July 1985 to April 1987, and is based on experiences obtained from military and industry participants. This handbook is for guidance only and cannot be cited as a requirement.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78

MIL-HDBK-115B(ARMY)

SAE-AMS2772 Heat Treatment of Aluminum Alloy Raw Materials

(Copies of these documents are available online at https://www.sae.org or by contacting the Society of Automotive Engineers World Headquarters, 400

Commonwealth Drive, Warrendale, PA 16096-0001.)

American Society of Mechanical Engineers (ASME)

ASME Y14.5M Dimensioning and

Tolerancing

ASME Y14.24 Drawings Types and Applications of Engineering Drawings

ASME Y14.34 Lists, Associated

ASME Y14.100 Engineering Drawing and Related Documentation Practices

(Copies of these documents are available online at https://www.asme.org or by contacting the ASME Information/Central Orders/Inquiries, P.O. Box 2300, Fairfield, NJ 07007-2300.)

INTERNATIONAL STANDARDIZATION AGREEMENTS (ISO) ISO 10012-1 Equipment, Quality

Assurance Requirements for Measuring - Part 1: Metrological Confirmation System for Measuring Equipment

(Copies of this document are available online at https://www.iso.org /iso/store.htm, or by contacting ASME Information Central Orders/Inquiries, P.O. Box 2300, Fairfield, NJ 07007-2300.)

National Aerospace Standards

NAS 410 NAS Certification and

Qualification of Non-