FED-STD-793B
5.33 FSC 9905 Holder, Card-Label Adhesives
Inspection plan:
Level S-2, SQL 4.0 percent defective.
Unit, intermediate, and shipping containers shall be secure
and free from damage. Markings on all containers shall be
securely attached, clear, and legible.
The minimum peel or stripping of adhesive shall be in
accordance with ASTM D903. No part of the surface to which
the adhesive is applied shall have bare spots or air
pockets. The adhesive shall be of uniform thickness and
there shall be no tendency, when removing the protective
backing, for the adhesive to separate from the plastic
tubing. Holders shall show no evidence of deterioration or
change in properties of the adhesive or protective backing
such as to make the holders unfit for use when stored under
warehouse conditions at a temperature of 70 to 90 degrees
F. and 50 percent plus or minus 2 percent relative humidity
for one year.
5.34 FSC 9905 Ribbon, Surveyor's Flagging
Inspection plan:
Level S-2, SQL 4.0 percent defective.
Unit, intermediate, and shipping containers shall be secure
and free from damage. Markings on all containers shall be
securely attached, clear, and legible.
The ribbon shall be free of holes, dirt, ragged edges, and
discoloration. No defects that affect appearance or
serviceability shall be permitted. Tensile strength and
elongation shall be determined in accordance with ASTM
D638. Tensile Strength 7.0 lb, minimum. Elongation
200 percent minimum.
6.
KEY WORDS:
depot
shelf
storage
life
shelf-life
Military Coordinating Activity:
Preparing Activity:
SO
GSA-FSS
19
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business