FED-STD-793B
Be able to spray and deposit a uniform film. The product
shall be brushed out or sprayed, and shall meet the dry
time, application properties, and visual evaluation of
gloss and color to the requirements of the purchase
document. Any products showing significant deviation from
the specified requirements should be laboratory tested to
verify the results.
Water-thinned products shall be stored at temperatures
between 40 and 115 degrees F (4 and 46 degrees C).
Solvent-thinned products shall be stored between 0 and 115
degrees F (-18 and 46 degrees C), except for the following:
Specification
Storage Temperature Range
MIL-P-15931
35-115
degrees
F
(2-46 degrees C)
MIL-C-83231
35-100
degrees
F
(2-38 degrees C)
MIL-C-83445
35-100
degrees
F
(2-38 degrees C)
TT-P-2756
35-115
degrees
F
(1.7-46 degrees C)
5.24 FSC 8030 - Sealants.
Inspection plan:
Level S-2, SQL 1.5 percent defective.
Containers shall be secure and free from leaks, bulges,
rust or other contaminants.
Markings shall be securely attached, clear and legible.
There shall be no separation, layering, or settling that
will not disperse to a homogeneous mixture when mixed.
There shall be no conditions which is not typical for the
product, such as lumps or inclusions. The viscosity and
drying or cure time shall be no more than 10 percent above
or below specification limits.
Store in temperature and humidity controlled space. Unless
otherwise specified on the package, temperatures shall not
exceed 60 degrees F (16 degrees C), and the relative
humidity shall not exceed 50 percent.
5.25 FSC 8040 - Adhesives.
See paragraph 5.24.
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business