FED-STD-793B
Inspection plan:
Level S-2, SQL 4.0 percent defective.
Containers shall be secure and free from leaks, bulges,
rust and other contaminants. Markings shall be securely
attached, clear and legible. Pigmented components shall be
free from grits, seeds, lumps, abnormal thickening or
livering, and shall not show pigment flotation or excessive
settling which cannot be easily reincorporated to a smooth,
homogeneous, pour able condition.
Unpigmented components shall show no trace of particulate
matter, either suspended in solution or settled on the
inner surface of the container, which cannot be readily
dispersed by agitation. Mixing shall be accomplished by
hand, power stirrer, or by an automatic shaking device, and
shall be completed within 5 minutes of the purchase
document requirement.
Materials shall be stored at temperatures between 35 and
115 degrees F (2 and 46 degrees C).
5.23 FSC 8010 - One Component Pre-Mixed Coatings (paints,
lacquers, enamels, etc.).
Inspection plan:
level S-2, SQL 4.0 percent defective.
Containers shall be secure and free from leaks, bulges,
rust or other contaminants.
Markings shall be securely attached, clear and legible.
There shall be no hard settling, caking, jelling, skinning,
curdling, seeding, rusting or other reaction with the
container, putrefaction, separation or other condition
which prevents the material from being mixed with an
automatic shaking device or with a power stirrer to a
smooth and homogeneous state, and without air bubbles.
Mixing shall be completed within 5 minutes for 1-gallon and
smaller containers, and within 10 minutes for 5-gallon
containers.
Material in self-pressurized aerosol dispensers shall be
mixable following label directions, and the product shall
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business