A-A-0051108 - Urine Sugar Test Tablets
A-A-51383 - Neisseria Enrichment Media, Dehydrated
A-A-51396 - Control Urine Chemistry, Normal
AA-R-001598 - Rack, Storage, Data Tape
AA-T-001599 - Truck, Hand, Data Tape Handling
AA-T-44 - Table, Bedside, Metal (S/S By Aa-C-10)
AISC-HDBK - American Institute Of Steel Construction Handbook - 72
AN115 - Shackle-Wire Rope (S/S By Ms20115)
AN2522 - Lens&24 Inch Double Beam (Use Ms25391)
AN3057 - Adapter&Electrical Accessory To Cable
AN3179 - Inductor, 30 Volt Laboratory Test (S/S By Ms-90306)
AN3207 - Cover-Terminal Block
AN3216 - Switch, Class D Limit (S/S By Ms25383)
AN3249 - Jack & Tip Voltmeter Test
AN3252 - Block-Terminal, Five Stud
AN3352 - Relay, 55 Amp, 2Pst, Unsealed, Class O (S/S By Ms24178)
AN3496 - Inverter&Instrument, Class A, 6 Volt&Amp Single Phase
AN365 - Nut, Self&Locking, 250 Deg. F (S/S By Ms&20365)
AN427 - Rivet, 100 Deg. Countersunk Head, Steel, Monel And Copper (Use Ms-20427)
AN500 - ( Images) Screw, Machine, Fillister Head, Coarse Thread
AN504 - ( Images) Screw, Tapping, Thread Cutting, Round Head, Machine Screw Thread
AN507 - Screw, Machine, Flat Head, 100 Degree (S/S By Ms 24693)
AN509 - Screw-Machine, Flat Head, 100 Deg., Structural (S/S By Ms 24694)
AN515 - Screw, Machine, Round Head, Coarse Thread (Use Ms-35206, Ms-35214, Ms-35218, Ms-51957)
AN520 - Screw, Machine, Round Head, Fine Thread (Use Ms 35207, Ms35215, Ms35219 And Ms51958
AN526 - Screw, Machine, Truss Head (Use Ms 35206, Ms 35207, Ms 35218, Ms 35219, Ms 51957 And Ms 51958
AN550 - Screw Wood, Flat Head, 82 Degree (Use Ms35492 Or 35494)
AN5532 - Indicator, Engine Synchroscope
AN5544 - Generator&Tachometer, Two Pole (Use Ms28054)
AN5547 - Generator, Tachometer, Four Pole (Use Ms28054)
AN5727 - Glass, Aircraft Instrument Cover (Use Ms 28105)
AN5769 - Gage, Hydraulic System Pressure (Use Ms28063)
AN5771 - Gage, Single, 1-7/8 Dial Pressure (S/S By Mil-Std 28061)
AN5772 - Gage, Dial Indicating, Pressure (S/S By Ms&28064
AN6011 - Gage And Panel Mounting High Pressure Oxygen
AN6231 - Scraper&Rod, Hydraulic Piston
AN6290 - Gasket&Straight Thread Tube Fitting, Boss (Use Ms28778)
AN6560 - Grommet And Washer-Parachute Pack (Use Ms22048)
AN658 - Terminal, Wire Rope Swaging, Fork End (Use Ms-20658)
AN663 - Ball End, Wire Rope, Swaging-Double Shank (Use Ms-20663)
AN664 - Ball End, Wire Rope, Swaging-Single Shank (Use Ms-20664)
AN666 - Terminal, Wire Rope, Stud (Use Ms-21259)
AN667 - Terminal, Wire Rope, Swaging-Fork End (Use Ms-20667)
AN668 - Terminal, Wire Rope, Swaging&Eye End
AN669 - Terminal, Wire Rope, Stud (Use Ms-21260)
AN773 - Fitting Assembly, Low Pressure Detachable Swivel Hose (Use Ms-27404)
AN931 - Grommet - Elastic (S/S By Ms35489)
ANA-BUL-107 - Inspection Standards For Stand & Dissection Tested Self Sealing Fuel & Oil Cells (S/S By Mil-Std-801)
ANA-BUL-112 - Acceptance Standards For Self Sealing Fuel & Oil Cells (S/S By Mil-Std-801)
ANA-BUL-125 - Procedure For Obtaining Qualification Test Approval Of Protective Coating Materials For Aircraft
ANA-BUL-143 - Specifications And Standards, Use Of (S/S By Mil-Std-143)
ANA-BUL-152 - Numbers, Serial, Aircraft Engine, Instructions For Assignment (S/S By Mil-Std-1559)
ANA-BUL-157 - Colors, List Of Standard Aircraft Camouflage (Use Fed-Std-595)
ANA-BUL-159 - Nut, Self-Locking, 250 Deg. F (Use Mil-N-25027)
ANA-BUL-164 - Lubricants, Hydraulic Fluids And Corrosion Inhibitors For Aircraft, Qualifying Procedure For (S/S By - Provisions Governing Qualification - Qualified Products Lists)
ANA-BUL-166 - Colors, List Of Standard Aircraft Glossy (Use Fed Std 595)
ANA-BUL-168 - Bolts, An Aeronautical Standard Drawings Reinstated By This Revision( )Specification Nb-3(
ANA-BUL-177 - Pumps, 200 Gph Power Driven Fuel
ANA-BUL-178 - Pumps, 400 Gph Power Driven Fuel
ANA-BUL-179 - Pumps, 700 Gph Power Driven Fuel
ANA-BUL-182 - Material Changes And Substitutions, Aircraft Engine Parts (Production Contracts)
ANA-BUL-245 - Certified X-Ray Laboratories
ANA-BUL-249 - Strainers, Fuel System (Specification An-S-40)
ANA-BUL-261 - Abbreviations And Contractions For Use On Airborne Equipment, Approved List Of (Use Mil-Std-783)
ANA-BUL-268 - Fitting Assembly, Low Pressure, Detachable, Hose Standards 1/An6270 An7733
ANA-BUL-275 - Guide For The Use Of Lubricants, Compounds, And Fluids In Aircraft
ANA-BUL-295 - Coding, Nylon Parachute Cloth Manufacturers Color
ANA-BUL-302 - Preservation And Packaging Card List For Aeronautical Spares, Form And Instruction For (S/S By Mil-Std-834)
ANA-BUL-306 - Engines, Aircraft Turbine And Jet, Designation Of
This bulletin contains the list of letters and numerals, and describes the method of their assignment and arrangement used by the Air Force and by the Navy in establishing the type and model designation of aircraft turbine and jet engines.
ANA-BUL-325 - Nut, Self-Locking, 550 Deg. F (Use Mil-N-25027)
ANA-BUL-337 - Drawing Status Notes On Air Force-Navy Aeronautical Standard Drawings (Use Mil-Std-32
ANA-BUL-352 - Engines, Rocket, Liquid Propellant, Designation Of (Use Mil-Std-815)Usaf(
ANA-BUL-360 - Hose End Fittings And Hose Assemblies
ANA-BUL-386 - Recommended Guide For Location And Actuation Of Pilot'S Control (S/S By Mil-Std-203)
ANA-BUL-388 - Inverters, Rotary (See Mil-I-7032 Or Qpl-7032)
ANA-BUL-389 - List Of Standardized And Approved Aircraft Ordnance And Chemical And Armament Items
ANA-BUL-390 - Change, Engineering, To Aircraft (S/S By Ana 445)
ANA-BUL-391 - Changes, Engineering, To Aircraft Engines, Propellers And Equipment In Production And Service (S/S By Ana 445)
ANA-BUL-395 - Engine, Aircraft Reciprocating, Designation Of (Replaced By Mil-Std-1557)
ANA-BUL-400 - Airborne Electronic And Associated Equipment, Applicable Documents
This bulletin lists the latest effective issue of specifications, standards, and publications to be used in the design and construction of electronic and associated equipment.
ANA-BUL-403 - An And Ms Utility Parts Standards For Engines And Propellers, Explanatory Information On
ANA-BUL-406 - Mock-Up, Engine, Construction & Inspection Of (S/S By Mil-Std-1592)
ANA-BUL-410 - Age Controls For Aeronautical Fuel System Synthetic Rubber Materials (S/S By Ana Bulletin 438)
ANA-BUL-418 - Differential Pressures
This bulletin sets forth the differential pressures for both knots and miles per hour to be used in the calibration of airspeed indicators, and includes tables for converting nautical to statute and statute to nautical miles.
ANA-BUL-419 - O Ring Type Packings, Gaskets, And Seals, Identification Of
ANA-BUL-421 - Atmospheric Properties - Extreme Cold And Hot, Standard For Aeronautical Design (S/S By Mil-Std-210)
ANA-BUL-422 - Procedures For Standardized Procurement And Utilization Of Aeronautical Engine Containers (See Mil-Std 648, 1367 And Mil-P-9024)
ANA-BUL-423 - Engine, Aircraft, Vendor Substantiation Test For (S/S By Mil-Std-1529)
ANA-BUL-424 - Designation, Radio And Radar Equipment Interconnecting Cable (Use Mil-W-5088)
ANA-BUL-425 - Ms Fitting, Classification Of Defects Of (S/S By Mil-Std-1655)
ANA-BUL-427 - Age Controls For Synthetic Rubber Parts (S/S By Ana Bulletin 438)
ANA-BUL-428 - Engine, Rocket, Liquid Propellant, Design And Installation Criteria For
ANA-BUL-432 - Atmospheric Properties - Polar And Tropical Atmospheres, Standard For Aeronautical Design (S/S By Mil-Std-210)
ANA-BUL-433 - Overcoding Of Standard Drawings
ANA-BUL-434 - Age Controls Of Age Sensitive Elastomeric Items (S/S By Mil-Std-801)
ANA-BUL-435 - Inspection Standards For Stand & Dissection Tested Non Self Sealing Type Cells (S/S By Mil-Std-801)
ANA-BUL-436 - Quality Standards For Aircraft Tires And Tubes (S/S By Mil-Std-698)
ANA-BUL-437 - Procedure For Airframe Contractor S Purchase Of Supply Items Requiring Qualification Tests
ANA-BUL-440 - Type Designation System For Aeronautical And Support Equipment (S/S By Mil-Std-875)
The purpose of this bulletin is to provide a type designation system for use by the Air Force and Navy Bureau of Naval Weapons in identifying aeronautical and aeronautical support equipment listed in Section II of the Annex to this bulletin,
ANA-BUL-441 - Aeronautical Use Of Limitation Notices On Federal And Military Series Specifications And Standards
ANA-BUL-444 - Electronic Equipment, Piloted Aircraft, Design Criteria For
ANA-BUL-445 - Engineering Changes To Weapons, Systems, Equipments And Facilities (S/S By Mil-Std-480 And Mil-Std-481)
ANA-BUL-446 - Procedure For Submittal And Listing Of Industry Specifications And Standards In Ana Bulletin No. 147
AND10000 - Drive - Type 1 Fluid Power Pumps (See Dwg And20000)
AND10001 - Mounting Pad And Drive - Type 2 Vacuum And Hydraulic Power Pumps
AND10003 - Mounting Pad And Drive - Aircraft Engine Fuel Pump (See Dwg And20003)
AND10005 - Mounting Pad And Drive - Aircraft Tachometer (See Dwg And20005)
AND10008 - Mounting Pad And Drive - Aircraft Engine Power Take-Off (Flange Type)
AND10009 - Mounting Pad And Drive - Small Aircraft Engine Starter
AND10010 - Mounting Pad And Drive - Aircraft Engine Propeller Governor Or Hydro-Control Valve
AND10049 - Bosses- Fluid Connection, Internal Straight Thread (S/S By Ms 33649)
AND10064 - ( Images) Fittings - Installation Of Flared Tube, Straight Threaded Connectors (Use Ms21344)
AND10065 - ( Images) Connection Assembly - Flexible, Fluid, Standard Design Of
AND10066 - Connectors-Electrical, Receptacles, Integral Mounting (Use Ms33678)
AND10074 - Boss Spacing - Hydraulic (Use Ms21343)
AND10079 - Terminal - Eye And Fork Cable
AND10080 - Fitting - Installation Of Universal Elbow (Use Ms21345)
AND10082 - Fastener, Installation-Snapslide (S/S By Ms-21327)
AND10087 - Screw-Installation And Limitations For Usage Of Self Tapping (Use Ms 33749)
AND10102 - ( Images) Tubing - Standard Dimensions For Round Seamless Alloy Steel
AND10104 - ( Images) Tubing, Steel, Corrosion Resistant, Round Standard Dimensions For
AND10106 - Tubing - Standard Sizes For Aluminum Alloy (52So) Round
AND10107 - Tubing - Standard Sizes For Aluminum Alloy (24St) Round
AND10108 - Tubing - Standard Sizes For Aluminum Alloy (61S) Round
AND10119 - Aluminum Alloy - Standard Conditions And Sizes For Sheet And Strip (24S)
AND10125 - Aluminum Wire - Standard Alloys, Tempers And Sizes Of Round And Hexagon (For Welding Rod And General Use)
AND10126 - Aluminum Wire - Standard Conditions And Sizes For Sheet, Strip
AND10130 - Aluminum Rod And Bar - Standard Alloys, Tempers And Sizes Of Round And Hexagon
AND10131 - Aluminum Bar - Standard Alloys, Temper And Sizes Of Square
AND10132 - Aluminum Bar - Standard Alloy And Temper (24St), And Sizes Of Rectangular
AND10150 - Starter Diagram - Hand Crank Flexible Shaft
AND10201 - Screens And Gaskets - Designs Requirements For Carburetor
AND10206 - Plug - Shielded Aircraft Engine Spark (Use Mil-S-7886)
AND10210 - Flange-Single 12 Cylinder 3 Bolt Magneto
AND10211 - Mounting Flange - Double Type Magneto
AND10214 - Coupling Assemblies-Double Type Magneto Drive
AND10215 - Mounting Flange-Single Type Magneto (9 And 14 Cyl)
AND10216 - Throttle-Handle Design For Engine
AND10217 - Plug - 14 Mm Shielded Spark (Use Mil-S-7886)
AND10219 - Plug - 14 Mm British Type Shielded Spark (Use Mil-S-7886)
AND10220 - Vapor Pressure Chart
AND10221 - Vapor Pressure Correction Chart
AND10222 - Fittings-Synthetic Tank General Features Of Construction (Superseded In Part )Cover( By Ms-33595 And In Part )Flange( By Ms-33596)
AND10223 - Levers-Correlation Of Power And Condition
AND10234 - Template-Propeller Blade Master Male
AND10235 - Template-Propeller Blade Female
AND10236 - Template Propeller Blade Angle Checking
AND10237 - Spline, Serrated
AND10300 - Installation Clearance&Type X Drive
AND10306 - Propeller Governor Installation Clearance Aircraft Engine (For Engines Of 999 Take Off H.P. Or Less)
AND10307 - Propeller Governor Installation Clearance-Aircraft Engine (For Engines Of 1000 Take Off H.P. And Over)
AND10312 - Element Installation Clearance-Engine Cylinder Head Temperature Measuring
AND10313 - Relief Valve Installation Clearance-Hydraulic
AND10328 - Installation Clearance-Type Xl-B Drive Magneto
AND10332 - Starter-Generator Installation Clearance, Type Xii Drive
AND10334 - Installation Clearance-Type Xx Drive Propeller Governor
AND10335 - Installation Clearance-Type Xix Drive
AND10342 - Regulator Installation Clearance- Dc Generator Voltage
AND10355 - Tolerances-Carbon Steel-Sheet And Strip (Use Fed Std 48)
AND10360 - Tolerance-Corrosion And Heat Resistant Steel Bars, And Rods And Wire (Use Fed-Std-48)
AND10362 - Tolerances-Carbon Steel Bar And Rod (Use Fed Std 48)
AND10367 - Tolerance-Alloy Steel Sheet And Strip (S/S By Fed-Std-48)
AND10375 - Color-Fluid Line Identification (Use Mil Std 1247)
AND10379 - Equivalents-Fraction And Decimal
AND10381 - Symbols-Material
AND10382 - Gauge Dimensions-Standard Wire And Sheet Metal
AND10383 - Cutting Plane-Example For
AND10384 - Cross Sectioning-Examples For
AND10385 - Alternate Position-Example
AND10387 - Drill Sizes And Drilled Hole Tolerances Twist
AND10388 - Lines-Conventional
AND10396 - Number-Aircraft Engine Cylinder Location Designation (Use Mil-Std-802)
AND10398 - Metals, Definition Of Dissimilar (S/S By Ms33586)
AND10399 - Number Aircraft Engine Location Designation (Use Mil-Std 802)
AND10401 - Case-Standards Dimensions For 2-3/4 Dial Instrument
AND10402 - Case-Standards Dimensions For 2-3/4 Dial Instrument (With Sump)
AND10403 - Case-Standard Dimensions For 1-7/8 Dial Instrument (Use Ms 33638)
AND10404 - Pointers-Standard Design Of Aircraft Instrument (Use Ms33585)
AND10406 - Thermocouple Leads-Iron-Constantan, Installation Of
AND10407 - Insulator - Installation Of Vibration
AND10410 - Pitot-Static And Pitot Tube Wiring Diagram For
AND10411 - Wiring Diagram-Percent Type Tachometer Indicator And Two Pole Tachometer Generator
AND10412 - Case - 2-Inch Size Instrument, Standard Dimensions For (Use Ms33598)
AND10413 - Instrument-Flight, Basic, Standard Arrangements Of (S/S By Ms 33635)
AND10425 - Insert Arrangements-Electrical Connector, Shell Sizes 8S, 10S, And 10Sl (Use Ms33680)
AND10426 - Insert Arrangements-Electrical Connector, Shell Sizes 12S And 12 (Use Ms33881)
AND10428 - Insert Arrangements - Electrical Connector, Shell Sizes 16S And 16 (Use Ms33683)
AND10429 - Insert Arrangements-Electrical Connector, Shell Size 18 (Use Ms33684)
AND10431 - Insert Arrangements-Electrical Connector, Shell Size 22 (Use Ms33686)
AND10432 - Insert Arrangements-Electrical Connector, Shell Size 24 (Use Ms 33687)
AND10433 - Insert Arrangements-Electrical Connector, Shell Size 28 (Use Ms33688)
AND10434 - Insert Arrangements - Electrical Connector, Shell Size 32 (Use Ms33689)
AND10435 - Insert Arrangements - Electrical Connector, Shell Size 36 (Use Ms33690)
AND10436 - Insert Arrangements-Electrical Connector Shell Size 40 (S/S By Ms 33691)
AND10437 - Insert Arrangements-Electrical Connector Shell Size 44 (S/S By Ms 33692)
AND10438 - Insert Arrangements-Electrical Connector Shell Size 48 (S/S By Ms 33693)
AND10439 - Receptacle Installation-Fuel Nozzle Grounding (Use Ms 33645)
AND10440 - Insert Design-Electrical Connector, Shell Size 18, Arrangement 16 (Use Ms33694)
AND10441 - Battery Installation
AND10443 - Contacts-Video Coaxial Connector (Use Ms33695)
AND10444 - Insert Arrangements - Electrical And Coaxial Connector, Shell Size 32 (Use Ms33696)
AND10445 - Sump Jar-Installation Of Battery
AND10446 - Compass Wiring Diagram-Remote Indicating Magnetic
AND10447 - Tachometer And Synchroscope Wiring Diagram-Single And Multi-Engine
AND10448 - Indicator Wiring Diagram- Air Position
AND10450 - Indicator Wiring Diagram-Electric Direct Current Turn And Bank
AND10451 - Compass Wiring Diagram-Gyro Fluxgate
AND10458 - Mounting Pad-Oil Connection, 3 And 4, Stud
AND10459 - Connectors-Electrical, Plugs, Integral Mounting (Use Ms33679)
AND10461 - Connections-Input Power Airborne Electronic Equipment, 28 V Dc, 115 V Single Phase Ac, And/Or 115/200 V 3 Phase Ac (Use Ms25245)
AND10462 - Plug-External Power, Ac, Wiring Of (S/S By Ms-17793)
AND10477 - Cross Recess-Dimensions For
AND10478 - Instrument-Electrical Indicating, Requirements For Sealed (Radio And Radar)
AND10481 - Standard Dimensioning System For Extruded Sections
AND10482 - Turnbuckles, Lock Wiring Of (Use Ms 33591)
AND10483 - Wiring Diagram-Torque Pressure, Manifold Pressure And Fuel Flow Indicating Systems
AND10550 - Rim Contours-Type I Main Landing Gear Wheel
AND10551 - Rim Contours-Type I Tail Wheel
AND10552 - Rim Contours-26X6 Type Ii Landing Gear Wheel
AND10553 - Rim Contours-30X7 And 32X8 Type Ii Landing Gear Wheel
AND10554 - Rim Contour-34 X 9 Type Ii Landing Gear Wheel
AND10558 - Rim Contour - 10 X 3 Type Ii Tail Wheel
AND10559 - Rim Contours - 10-1/2 X 4, 12-1/2 X 4-12 X 5 Type Vii Extra High Pressure Tail Wheel
AND10561 - Rim Contour-7.00-6 (Type Iii Low Pressure) Main Landing Gear Wheel (Use And 10562)
AND10568 - Rim Contours - Type Iv Main Landing Gear And Tail Wheels
AND10570 - Rim Contours - Type Vi (Low Profile) Nose Wheel
AND10574 - Rim Contour - 17-1-2 X 6-1-2 Type Vii (Extra High Pressure) Tail Wheel
AND10584 - Rim Contours, 52 X 16 And 56 X 16, Type Vii, Extra High Pressure, Main Landing Gear Wheel
AND10600 - Trunnion Assembly-Camera
AND10601 - Wedge - Instrument Mounting
AND10602 - Stud - Vertical Aerial Camera Mount
ANMC - Editorial Guide, Metric
DDD-W-415 - Wiping Cloths, Cotton (S/S By Ddd-R-30)
DD-G-496 - Glasses, Gage, Reflex And Round, Tank (For Pressures Under 125 Pounds)
DD-G-616 - Glasses, Medicine (S/S By Dd-M-200)
DOD-A-83577 - Assemblies, Moving Mechanical, For Space & Launch Vehicles,
DOD-E-83578 - Explosive Ordnance For Space Vehicles, General Specification For (Metric)
This specification sets forth the general requirements for the design, manufacture, and testing of explosive ordnance. The requirements stated in the specification are a composite of those that have been found to be cost effective for high reliability space vehicle applications.
DOD-E-8983 - Electronic Equipment, Aerospace, Extended Space Environment, General Specification For
This specification sets forth the general requirements for the design and manufacture of electronic components and equipment for space vehicles.
DOD-HDBK-178 - Quantitative Description Of Obscuration Factors For Electro-Optical And Millimeter Wave Systems (Metric)
This handbook is intended to be a basic design tool for the Army engineer or scientist.
DOD-HDBK-791 - Maintainability Design Techniques Metric
Maintainability and reliability are the two major system characteristics which combine to form the commonly used effectiveness index availability. Although reliability and maintainability share co-importance, maintainability merits special consideration because of its influence on system maintenance activities, i.e., the expenditure of man-hours and material, which represent significant budgetary costs over the life of the system. Maintenance activities also reduce the operational readiness of a system.
DOD-M-24680 - Metric Machinery/Equipment General Requirements For
DOD-STD-1690 - Maritime Metric Practice Guide (S/S By Astm-F1332)
This standard discusses SI units and those non-SI units accepted for limited use or time with SI, with particular application to the marine industry.
DOD-STD-1700 - Data Management Program
DOD-STD-1702 - Integrated Logistics Support Programs For Equipment, Subsystems, &Systems (Metric)
DOD-STD-1768 - Procedures For Development Of Depot Technical Data
This standard defines the functions and procedures for the development of Depot Technical Data (control manuals, engineering data, and other technical orders) for use in depot level overhaul and repair of Aerospace Vehicle Equipment (AVE) and Support Equipment (SE).
DOD-W-83575 - Wiring Harness, Space Vehicle, Design And Testing, General Specification For
This specification sets forth the general design and testing requirements for electrical wiring harnesses and cable assemblies that are to be installed in space vehicles.
FED-STD-00104 - Conservation Of Automotive Gasoline
FED-STD-00107 - Mucilage (Use Mmm-M-792)
FED-STD-00116 - Mattress, Bed (Felted, Cotton)
FED-STD-00117 - Federal Rating And Test Standard For Motor Vehicle Performance Based On Grade Ability
FED-STD-00136 - Flame-Spread Properties Of Materials
FED-STD-00139 - Battery, Storage, Lead-Acid, For Electric Operated Industrial Truck And Tractors
FED-STD-00160 - Rubber Products, Definitions And Terms For Visible Defects Of
FED-STD-00169 - Pad, Gauze, Gauze And Cellulose Or Regenerated Viscose Cellulose Fiber
FED-STD-00186 - Marking Of Valves, Fittings, Flanges, And Unions Used In Nuclear Reactor Systems
FED-STD-00210 - Road And Paving Material, Method Of Sampling And Testing
FED-STD-00281 - Labeling And Marking Requirements For Shipment And Segregated Storage Of Flammable Liquids Stocked By General Services Administration (S/S By Fed-Std 313)
FED-STD-1 - Standard For Laboratory Atmospheric Conditions For Testing (S/S By Astm-E171)
This standard defines laboratory atmospheric conditions for testing whenever temperature and/or humidity must be controlled in order to obtain reproducible results.
FED-STD-135 - Card, Guide, File, Pressboard And Card Set, Guide, File, Pressboard
FED-STD-147 - Tape, Packaging, Adhesive And Gummed, Methods Of Inspection, Sampling, And Testing
FED-STD-149 - Syringe, Luer, Interchangeable Component, Dimensions Of
FED-STD-158 - Cements, Hydraulic, Sampling, Inspection & Testing
FED-STD-166 - Paper, Duplicating, Copy, Liquid Process (Use Uu&P&232)
FED-STD-186 - Marking Of Valves, Fittings, Flanges, And Unions Used In Nuclear Reactor Systems
FED-STD-187 - Identification Of Pressed Bends, Forms, Seams, And Joints, (Sheet Metal)
FED-STD-190 - Term Used For Classification Of Chemicals And Chemical Products
FED-STD-222 - Radiation Standard For Communication And Other Information - Processing Equipment (S/S By Nsa Pub Nacsem 5100 (Classified) And Nsa Pub Nacsem 5103 (Classified))
FED-STD-304 - Metal, Chemical Test Methods (For Identification)
FED-STD-313 - Material Safety Data, Transportation Data, And Disposal Data For Hazardous Materials Furnished To Government Activities
This standard establishes requirements for the preparation and submission of Material Safety Data Sheets (MSDS) by contractors who provide hazardous materials to government activities.
FED-STD-358 - Sampling Procedures
FED-STD-368 - Quality Control System Requirements
FED-STD-376 - Preferred Metric Units For General Use By The Federal Government
FED-STD-793 - Depot Storage Standards
This standard details depot storage conditions, depot inspection instructions, and shelf-life extension criteria for GSA-managed shelf-life material.
FED-STD-89 - Color Code For Gas Mask Canister Identification
GGG-T-561 - Tools, Blacksmiths And Horseshoers (S/S By Ggg-T-563)
IEEE268 - Metric Practice, Ieee Standard For (S/S By Ieee/Astm-Si10)
This document sets forth standard metric practice for the United States.
IEEE945 - Electrical And Electronics, Science And Technology Ieee Recommended Practice For Preferred Metric Units For Use In
ISO1000 - Units, Si And Recommendations For The Use Of Their Multiples And Of Certain Other Units (See Notice Of Withdrawal For Replacement Information)
This International Standard describes the International System of Units (in clauses 3,4 and 6); recommends selected decimal multiples and submultiples of SI units for general use and gives certain other units which may be used with the International System of Units (in clauses 5 and 7, and annex A); quotes the definitions of the SI base units (in annex B).
ISO8879 - Information Processing-Text And Office Systems-Standard Generalized Markup Language (Sgml)
JAN-C-755 - Coating, Fire-Resistant (For Woven Cotton Matting)
JAN-F-419 - Firing-Devices, Pull-Release-Type, M-3
JAN-G-515 - Grog, Insulating, Granular, Calcined
JAN-I-225 - Interference-Measurement, Radio-Methods Of, 150 Kilocycles To 20 Megacycles (For Components And Complete Assemblies)
JAN-M-745 - Moisture-Resistance-Test, For Material Items Used In Electronic, Communication, And Electrical Equipment (S/S By Mil-E-5272)
MIL-A-26669 - Acoustical Noise Tests, Aeronautical And Associated Equipment (Use Mil-Std-810)
MIL-A-4777 - Album, Photographic Print, Type A-2
MIL-A-83577 - Assemblies, Moving Mechanical, For Space And Launch Vehicles, General Specification For
MIL-A-9837 - Analytical Overhaul
MIL-B-12547 - Binders, Load, Lever-Type
MIL-B-17530 - Book (Instruction And Record), Performance Standards For Electronic Equipment (S/S By Mil-M-21741)
MIL-B-17535 - Book (Instruction And Record) (Maintenance Check-Off, For Electronic Equipment) (S/S By Mil-M-21741)
MIL-B-17668 - Brass Casting, Commercial (S/S By Qq-B-621)
MIL-B-2263 - Balling Gun, Veterinary
MIL-B-2562 - Bandage, Cotton (Derby)
MIL-B-5478 - Bill Of Materials; Aircraft And Aeronautical Equipment (Production Contracts)
MIL-B-5479 - Bill Of Materials; Aircraft And Aeronautical Equipment (Experimental Contracts)
MIL-B-5495 - Bulbs; Electrical Resistance Type Thermometer (-70 Degrees To +150 Degrees C) (S/S By Mil-B-7990)
MIL-B-5576 - Breakdown; Electronic Equipment Parts (S/S By Mil-B-5005)
MIL-B-9862 - Binder, Loose Leaf, Fabric Hinge, Five Ring
MIL-BUL-100 - List Of Specification And Standard Approved By The Naval Sea Systems Command (Os)
MIL-BUL-147 - Specifications And Standards Of Non-Government Organizations Released For Flight Vehicle Design And Construction
This bulletin lists non-Government specifications and standards approved as indicated for use in new design of structure, airframe, and related fluid systems on aerospace vehicles.
MIL-BUL-343 - Documents Applicable To Aircraft Engines And Propellers, Use Of
MIL-BUL-400 - Airborne Electronic And Associated Equipment, Applicable Documents (No S/S Documents)
The purpose of this bulletin is to list the latest effective issue of specifications, standards, and publications to be used in the design and construction of airborne, electronic and associated equipment.
MIL-C-12992 - Cable Assembly, Power, Electrical (Cord Cx-227/Tvq-1)
MIL-C-13335 - Coating For Magnesium And Magnesium Alloys
MIL-C-16212 - Coffee-Makers, Electric, Corrosion-Resisting Steel (Naval Shipboard Use) (S/S By Gg-C-531)
MIL-C-167 - Clinometer, Ball In Tube, Mark 4
MIL-C-17795 - Cleaning And Protecting Integral Piping For Oil Hydraulic Power Transmission Equipment (S/S By Mil-Std-419)
MIL-C-18104 - Control, Tracking Recorder C-1388/Asb-1A
MIL-C-18591 - Carbon Monoxide Elimination, Requirement For (S/S By Ms-800)
MIL-C-1901 - Cable, 1-Conductor, Submarine Mine M4 (Buna S Synthetic Rubber Insulated)
MIL-C-19801 - Converter, Oxygen, Aircraft, Liquid To Gaseous, Type Mb-8
MIL-C-19874 - Cleaning Requirements For Nuclear Primary Coolant Equipment Including Piping Systems
MIL-C-24133 - Calibration Procedures, Preparation Of (S/S By Mil-M-38793)
MIL-C-2598 - Cutter, Molar, Extractor And Handle, Veterinary
MIL-C-26261 - Combat Control Central An-Fsq-32(V)
MIL-C-27171 - Chart, Standard Missile Characteristics, Preparation Of
MIL-C-27439 - Computer, Performance, Multijet, General Specification For
MIL-C-27958 - Communication Central An/Mrc-107
MIL-C-3660 - Case Section, Mailing, Microscope Slide
MIL-C-46384 - Calibration Technical Bulletins And Related Engineering Services (S/S By Mil-M-63037)
MIL-C-60248 - Calibration Equipment, Commercial And Commercially-Modified
MIL-C-82177 - Commercial Repair Parts Support, General Specification For
This specification covers Marine Corps requirements for contractor commercial repair parts support and commercial repair parts ordering. Concurrent delivery of commercial repair parts, special tools, and commercial type operator's manuals, lubrication charts (when applicable), commercial parts manuals, and repair manuals with equipments is mandatory.
MIL-C-85674 - Control Units C-11628/Arc, C-10777A/Arc And C-11132/Arc C-10320/Arc And C-10777/Arc
This specification establishes the performance, design, and test requirements for the C-11628/ARC, C-10777A/ARC, C-11132/ARC, C-10320/ARC and C-10777/ARC Control Units.
MIL-D-10167 - Drawings, Manufacturers, For Electronics Command Equipment
MIL-D-11203 - Drawings And Data Lists, Reproducible, Preparation Of (For Tank And Automotive Materiel)
MIL-D-13570 - Dust, Testing By Exposure To (S/S By Mil-Std-810)
MIL-D-19731 - Data Sheets For Aircraft And Missile Systems Support Equipment
MIL-D-22688 - Data, Avionics Design Requirements For Developing Aviation Training Devices
MIL-D-26715 - Descriptive Identification Data To Be Furnished By Government Suppliers
MIL-D-5028 - Drawings And Data Lists, Preparation Of Manufacturers (For Production Aeronautical And Associated Equipment) (Asg)
MIL-D-55124 - Drawings, Contractor Design Activity, For Signal Corps Equipment (Use Mil-D-1000)
MIL-D-55176 - Data, Electronics Command Engineering Document Control
This specification covers the entry of data into tabulating cards for use by the Electronics Command for control of Engineering Data.
MIL-D-8706 - Data And Tests, Engineering, Contract Requirements For Aircraft Weapon Systems
MIL-D-9402 - Design Of Electrical Equipment In Aircraft, General Specification For (Use Mil-E-25499)
MIL-D-9863 - Decalcomanis For Technical Information File Of Ground Support Equipment
MIL-E-10002 - Radar Trial Fire Training Kit Ph-645( )/Gp
MIL-E-15136 - Electric-Equipment, Explosion-Proof: Basic Requirements For (S/S By Mil-E-2036)
MIL-E-17362 - Electronic Repair Part Requirement, Procedure For Provisioning Technical Documentation And Stock Numbering
MIL-E-17751 - Electron Tubes, For Guided Missiles, Supplemental Requirements (S/S By Mil-E-1/3)
MIL-E-20003 - Extractors, Ruptured Cartridge, Mark Ii, Mark Iv, And Caliber .50, M5
MIL-E-22843 - Equipment, Low Noise Level (Shipboard) (S/S By Mil-Std-740)
MIL-E-25499 - ( Images) Electrical System, Aircraft, Design And Installation Of, General Requirements For
This specification covers the general requirements for the design and installation of alternating-current and direct-current electrical systems in military aircraft.
MIL-E-26144 - Electric Power, Missile, Characteristics And Utilization, General Specification For
MIL-E-26338 - Electric Power, Portable Supply, Characteristics Of
MIL-E-26362 - Electric Power, For Utilization Equipment, Characteristics Of (Use Mil-E-4158)
MIL-E-26491 - Electrical Load Analysis, Ground Equipment, Requirements For
MIL-E-27073 - Electronic Modules, Ground Electronic Equipment, General Specification For
MIL-E-38453 - ( Images) Environmental Control, Environmental Protection, And Engine Bleed Air Systems, Aircraft, General Specification For (S/S By Mil-E-87145)
This specification covers performance, design, and testing requirements for the environmental control, the environmental protection, and the engine bleed air systems of aircraft.
MIL-E-4970 - Environmental Testing, Ground Support Equipment, General Specification For (Use Mil-Std-810)
MIL-E-60106 - Engineering, Service, Calibration Equipment, General Specification For
MIL-E-83210 - Equipment, Electronic, Criteria For The Utilization Of Micro/Molecular Electronic Technology
MIL-E-8970 - ( Images) Engine And Related Propulsion And Power Equipment, Aircraft, Acceptance Tests Of, Sampling Plan For, Statistical
This specification covers acceptance tests, by the statistical sampling plan (SSP), for all types of production aircraft engines or any related propulsion and power equipment requiring tear-down after the initial run.
MIL-F-1413 - File, Dog, Toenail
MIL-F-17738 - Fan, Vaneaxial, Portable, Spark Resistant, 500 C.F.M. At 2-1/2 Inch Static Pressure
MIL-F-2390 - Forceps, Splinter
MIL-F-2517 - Float, Dental, Veterinary
MIL-F-25381 - Flight Testing, Electric System, Piloted Aircraft And Guided Missile, General Requirements For
This specification covers the general requirements for flight testing of electric systems of piloted aircraft and guided missiles.
MIL-F-2551 - Forceps, Wolf-Tooth, Veterinary
MIL-F-5055 - Finishes; Aircraft, Application And Treatment Of, For Producing Aerodynamically Smooth Surfaces
MIL-F-5656 - Felt, Wool (For Aircraft Applications) (S/S By C-F-206)
MIL-F-9882 - Food Service Attendants
MIL-F-9892 - Food Service Contracts
MIL-G-14548 - Gold Plating (Electrodeposited)
MIL-G-17494 - Generator Set, Diesel Engine, Alternating Current, 750 Kw (Naval Shipboard Use
MIL-G-6027 - Generator; Tachometer, Two-Pole, Aircraft
MIL-H-24148 - Human Engineering Requirements For Bureau Of Ships Systems And Equipment(S/S By Mil-H-46855)
MIL-H-2558 - Hook, Neurectomy (Veterinary)
MIL-H-2608 - Handpieces, Dental Engine
MIL-H-27894 - Human Engineering Requirements For Aerospace Systems And Equipment (Use Mil-H-46855)
MIL-H-47143 - Heat Treating, Type D6Ac Alloy Steel, Processes For
This specification covers three methods of heat treating parts fabricated from D6AC alloy steel conforming to MIL-S-47036 to an ultimate strength level of 200,000 to 230,000 pounds per square inch (psi).
MIL-H-5468 - Handbooks, Service Instructions (For Aircraft Engines) (S/S By Mil-H-6653)
MIL-H-5511 - Hose: Aircraft, Hydraulic, Pneumatic, Fuel And Oil Resistant (S/S By Mil-Dtl-8794 Or Mil-Dtl-8795)
MIL-H-8729 - Hi-Valu Item Application Summary, Preparation Of
MIL-HDBK-1 - Cross Index Of Chemically Equivalent Specifications And Identification Code (Ferrous And Nonferrous Alloys) (Handbook H-1)
MIL-HDBK-111 - Value Engineering
MIL-HDBK-115 - Us Army Reverse Engineering Handbook (Guidelines And Procedures)
This HANDBOOK, which provides the guidelines and procedures for performing reverse engineering, was created using current applicable laws and knowledge gained during a trial program from July 1985 to April 1987, and is based on experiences obtained from military and industry participants. This handbook is for guidance only and cannot be cited as a requirement.
MIL-HDBK-140 - Security Classification And Cognizant Activity Of Electronic Equipment
MIL-HDBK-152 - Office Duplicating Processes
MIL-HDBK-153 - Office Copying Processes And Equipment
MIL-HDBK-206 - Gear Tooth, Load Ratings (Except Aeronautical Applications)
MIL-HDBK-216 - Rf Transmission Lines And Fittings (Including Change Notice 1 Thru Change Notice 10)
This handbook provides pertinent information of R.F. Transmission Lines and Fittings, important assembly techniques and necessary fabrication precautions to insure optimum operational results and to minimize probability of failure.
MIL-HDBK-221 - Fire Protection Design Handbook For U.S. Navy Aircraft Powered By Turbine Engines
This Handbook embodies requirements and design objectives for fire protection for all types of manned Naval aircraft (including helicopters) with turbine engines.
MIL-HDBK-245 - Preparation Of Statement Of Work (Sow)
This handbook applies to the preparation of Statements of Work (SOWs) for projects and programs that have deliverables and /or services performed. It is written to implement the acquisition policies established in DODD 5000.1. It covers the preparation of SOWs which correlate to the acquisition such as DoDI 5000.2. This handbook is for SOWs in DoD solicitations and contracts and covers work requirements , in conjunction with applicable performance/design requirements contained in specifications, but also data deliverables contained in Contract Data Requirements Lists (CDRLs). The Federal Acquisition Regulations (FAR) and Defense Federal Acquisition Regulation Supplements (DFARS) discuss the essentiality of the SOW for sound contracting. Ab offeror submits a proposal based on his perception of the Government's needs as defined in the RFP.
MIL-HDBK-25 - Glossary Of Photographic Terms Including Document Reproduction
MIL-HDBK-259 - Life Cycle Cost In Navy Acquisitions
This handbook provides information on the use of life cycle costing in system and equipment acquisitions. It makes no attempt to develop a LCC standard but rather describes the general methodology and procedures which help make life cycle costing a productive in-house tool as well as a means of program or project evaluation. As inroads are made in the usage of LCC analysis, estimating and implementation techniques should improve, particularly in the operating and support (O&S) cost areas. To maximize their usefulness, LCC analyses should be tailored to the particular needs of an acquisition.
MIL-HDBK-266 - Application Of Reliability - Centered Maintenance To Naval Aircraft, Weapon Systems And Support Equipment (S/S By Mil-Std-2173)
MIL-HDBK-275 - Guide For Selection Of Lubricants, Fluids, And Compounds For Use In Flight Vehicles And Components
This handbook establishes design guides for selection of suitable lubricant fluids and compounds, which conform to approved specifications, as required by MIL-STD-838. It includes descriptive material relative to application and limitations of the materials, a list of material specifications together with specific requirements (table I), and a list of the more important specification characteristics (tables II and III). (See pages 18 through 43.) Viscosity-temperatures characteristics of aircraft and aircraft engine oils are shown in figures 1 and 2 (see pages 47 and 48). Lubricant fluids and compounds containing graphite are not preferred for application in new designs and all efforts should be made to select lubricants not containing graphite.
MIL-HDBK-276/1 - Life Cycle Cost Model For Defense Materiel Systems Data Collection Workbook
This handbook provides information on the cost elements and structure of the Marine Corps Life Cycle Model for Defense Materiel Systems.
MIL-HDBK-276/2 - Life Cycle Cost Model For Defense Materiel Systems Operating Instructions
This handbook provides the operating instructions for the Model. The operating instructions track the creation of a Model data base called SAMPLE which is available to all users. The results of this process are presented beginning with figure 3. This handbook is not meant to be a tutorial guide for using the Model, but is presented as reference material for use prior to using the Model or any of its major functions.
MIL-HDBK-300 - Technical Information File Of Support Equipment
This document is intended to provide a hyperlink to the MIL-HDBK-300 data base which provides technical and pictorial information for comparison of DoD In-inventory (stock listed) support equipment used on aircraft and missile weapon systems. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.
MIL-HDBK-318 - Cargo Aircraft Compartment Dimensional Data
MIL-HDBK-336/1 - Survivability, Aircraft, Nonnuclear, General Criteria-Volume 1 (See Notice 2 For Replacement Information)
MIL-HDBK-336/2 - Survivability, Aircraft, Nonnuclear, Airframe-Volume 2 (See Notice 2 For Replacement Information)
MIL-HDBK-336/3 - Survivability, Aircraft, Nonnuclear, Engine-Volume 3 (See Notice 2 For Replacement Information)
The objective of volume 3 is to provide a ready reference containing design information on military aircraft engine and propulsion system survivability.
MIL-HDBK-51 - Evaluation Of A Contractor'S Inspection System (Handbook 51)
This specification establishes requirements for contractors' inspection systems.
MIL-HDBK-694 - Aluminum And Aluminum Alloys
The purpose of this handbook is to provide, in condensed form, technical information and data of direct usefulness to design engineers.
MIL-HDBK-727 - Design Guidance For Producibility
MIL-I-16637 - Instruments, Submarine Diving Panel
MIL-I-16910 - Interference Measurement, Electromagnetic, Methods And Limits (Use Mil-Std-461, 462, And 463)
MIL-I-17414 - Impregnation Of Porosity In Copper-Base Alloy Castings, Process For (S/S By Mil-Std-276)
MIL-I-17623 - Interference Measurement, Electromagnetic, Methods And Limits, For Electric Office Machines, Printing And Lithographic Equipment (Use Mil-Std-461, Mil-Std-462, And Mil-Std-463)
MIL-I-23548 - Item Identification Data From Suppliers
This specification covers requirements for obtaining item identification data from Government suppliers on items except electronic items.
MIL-I-27337 - Intercommunication Set An-Aic/18 Bench, Preflight, And Flight Tests Of
MIL-I-6143 - Insignia And Marking For Search And Rescue Aircraft, Design Requirements For
MIL-I-82110 - Interim Repair Parts Support, General Specification For
MIL-I-8677 - Installation Of Armament Control Systems And Associated Equipment In Naval Aircraft
This specification establishes minimum requirements for the installation of armament control systems and associated equipments for all types of weapons installed in naval aircraft.
MIL-I-8700 - Installation And Test Of Electronic Equipment In Aircraft, General Specification For (S/S By Sae-As8700)
MIL-J-83302 - Job Performance Aids, Advanced-Type, For Vnaf Organizational Maintenance
MIL-L-17192 - Lubrication Design, Lubricants, And Lubrication Information For Electronic Equipment, General Specification (Use Mil-Std 454)
MIL-L-9875 - Liquid Oxygen-Nitrogen Generating And Charging Equipment, General Specification For Maintainability Features Of
MIL-M-11266 - Macroetch Test And Macrographs For Steel Bars, Billets And Blooms
MIL-M-13231 - Marking Of Electronic Items (S/S By Mil-Std-13231)
MIL-M-13749 - Metal Powder, Ferrous, Sintered, Structural Parts
MIL-M-17891 - Mock-Ups: Aircraft Engines Including Rocket Engines, Constructions And Inspection Of (S/S By Ana-Bul-406)
MIL-M-21255 - Modification Kit For Radar Sets An/Aps-38 And An/Aps-38A
MIL-M-23313 - Maintainability Requirements For Shipboard And Shore Electronic Equipment And Systems
MIL-M-23530 - Mock-Up Of Main And Auxiliary Shipboard Machinery Spaces
This specification covers the requirements for the development and presentation of mock-ups of main and auxiliary shipboard machinery spaces and the requirements for mock-up booklet and other supporting documentation.
MIL-M-24365 - Maintenance Engineering Analysis, Establishment Of, And Procedures And Formats For Associated Documentation, General Specification For
MIL-M-24791/1 - Module, Fiber Optic, Transmitter, Digital, 160 Mbd, Associated Detail Specification For
MIL-M-24791/2 - Module, Fiber Optic, Receiver, Digital, 16 Mbd, Associated Detail Specification For
MIL-M-25500 - Mockup Testing, Electrical System, Piloted Aircraft And Guided Missile, General Requirements For
This specification covers the general requirements for testing of the electric-system mockups prior to prototype flight of piloted aircraft or guided missiles. (See 6.3.1.)
MIL-M-26512 - Maintainability Requirements For Aerospace Systems And Equipment (S/S By Mil-Std-471)
MIL-M-28787/50 - Module, Electronic, Standard Hardware Program Driver, Interface, Digital, Key Code Qdg
MIL-M-3157 - Marking Of Domestic Shipments By Contractors For Supplies And Equipment Consigned To The Medical Departments Of The Armed Services (S/S By Mil-Std-129)
MIL-M-38310 - Mass Properties Control Reguirements For Missile And Space Vehicles (S/S By Mil-Std-1811)
This document provides a means to establish a system for the management of mass properties during the conceptual, validation, development, production and deployment of surface-to-surface ballistic vehicles and space vehicles, or portions thereof.
MIL-M-38761/3 - Microfilm And Microfilm Frame Deck Used For Recording Engineering Drawings And Associated Data
MIL-M-5354 - Magnesium Alloy Zk60A Extruded Bars, Rods, And Shapes
MIL-M-55214 - Maintainability Requirements, General, For Electronic Equipment (S/S By Mil-Std 470, 471 Or Mil-Hdbk 472)
MIL-M-58014 - Maintenance Package For Transportation Corps Equipment.
MIL-M-5870 - Mount, Tracking Computer, Type B-1
MIL-M-82527 - Maintenance Requirements Cards (Mrc S) And Maintenance Index Pages (Mip S), Development And Preparation Of (Navord Planned Maintenance System) (Use Mil-P-24534)
MIL-N-17506 - Nickel-Copper-Aluminum Alloy, Wrought (S/S By Qq-N-286)
MIL-N-19900 - Nuclear Propulsion Control And Instrumentation Equipment, General Requirements
MIL-O-23626 - Overhaul And Repair Of Radar Set An/Mps-11A (Use Mil-R-82173)
MIL-O-9573 - Oscillator, Audio Frequency O&493( )-Ur And Keyer Ky&220( )-Ur
MIL-P-11422 - Peptone
MIL-P-12932 - Packaging Of Bolts And Nuts
MIL-P-13421 - Packaging Of Set Eng 6 No. 330&010 (Canvas Worker,S Equipment, Set No.1)
MIL-P-14535 - Plating, Black Nickel (Electrodeposited) (Use Mil-P-18317)
MIL-P-1501 - Packaging And Packing Of Canned Subsistence Items, Overseas Shipment
MIL-P-15088 - Plastic-Materials, Molding, And Plastic-Parts, Molded; Thermosetting (S/S By Mil-M-14)
MIL-P-15137 - Provisioning Technical Documentation For Repair Parts For Electrical And Mechanical Equipment (Naval Shipboard Use)
MIL-P-16599 - Packing, Metallic, Plastic (For Ordnance Use) (S/S By Mil-P-17303)
MIL-P-17378 - Porcelain Enamel Coating (For Snorkel Exhaust Piping)
MIL-P-17652 - Preparation For Delivery Of Electronic, Electrical And Electro-Mechanical Parts (S/S By Mil-P-17555)
MIL-P-17900 - Production Data Package
MIL-P-17993 - Provisioning Technical Documentation Requirements And Procedures
MIL-P-18358 - Paint, Camouflage, Resin-Oil-Emulsion-Type And Resin-Emulsion-Type, Paste
MIL-P-21873 - Provisioning, Initial Support, General Requirements For (Use Mil-Std-1375)
MIL-P-21873/1 - Provisioning, Initial Support, General Requirements For (Use Milstd-1375)
MIL-P-23189 - Pert/Time And Pert/Cost Management Information Systems For Planning And Control (Navy)
MIL-P-23302 - Procurement Packages For Aeronautical Spare Parts, Requirements For
MIL-P-24014 - Preclusion Of Hazards From Electromagnetic Radiation To Ordnance, General Requirements For (Use Mil-Std-1385)
MIL-P-24052 - Preliminary Plans And Test Procedure Requirements For Radiac Instruments
This specification covers the requirements for preliminary plans and test procedures to be furnished during the procurement of radiac instruments (see 6.1).
MIL-P-24310 - Provisioning Monitoring System Procedures For Naval Shipboard Electrical And Mechanical Equipment And Components (S/S By Mil-Std-2186)
MIL-P-2552 - Parer, Hoof
MIL-P-25797 - Propulsion Engine Requirements, Air Vehicle, Specification For, Outline And Instructions For Preparationof
MIL-P-28700 - Personnel Planning Data For Naval Systems
MIL-P-28759 - Planned Maintenance Subsystem (Pms) For Shore And Shipboard Equipment Maintenance Requirement Cards (Mrc S) And Maintenance Index Pages (Mip S) Preparation And Contents Of (Use Mil-P-24534)
MIL-P-3130 - Padding For Combat Vehicles (S/S By Mil-P-14401)
MIL-P-3406 - Packaging Of Libraries, Reference, Field Orcanizations
MIL-P-3468 - Packaging Of Spare Parts And Sub-Assemblies For Laundry, Dry Cleaning, Kitchen, Bakery And Refrigeration Equipment (Replacement Items Only)
MIL-P-3712 - Packaging Of Office Machine Parts
MIL-P-3862 - Packaging Of Chemicals, Dry And Paste (Use Ppp-C-301)
MIL-P-3863 - Packaging Of Chemicals, Liquid (Use Ppp-C-300)
MIL-P-38785 - Provisioning, Phased (S/S By Mil-Std-1517)
MIL-P-5051 - Paint; Anti-Fouling (For Aircraft Hull Bottoms)
MIL-P-5052 - Paint; Anti-Fouling, Application Of To Aircraft Hull Bottoms
MIL-P-51005 - Parachute, 100-Pound Bomb, M2
MIL-P-84000 - Provisioning Screening Data To Be Furnished By Government Suppliers
MIL-R-10294 - Radio Set An/Crd-3() (Components For)
MIL-R-11471 - Radiographic Inspection Of Metals (S/S By Mil-Std-453)
MIL-R-15456 - Refrigeration-Equipment: Cabinets, Frozen-Food, Self-Contained; Coolers, Drinking-Water Electric, Self-Contained; Refrigerators, Electric, Self-Contained (Naval Shipboard Use) (S/S By Mil-R-1834)
MIL-R-16091 - Radio Interference Research, Development Of Methods And Techniques, Instructions, And Recommendations
MIL-R-16335 - Radio Receiver, Remote Control Equipment
MIL-R-16700 - Rectifiers, Metallic, For Special Applications
MIL-R-17659 - Renovation Of Navy Special Clothing
MIL-R-18136 - Research And Engineering Reports, Format And General Requirements (Use Mil-Std 847)
MIL-R-18933 - Radio Interference Phenomena Studies, Evaluations Investigations, Measurement Standards, Techniques And Effectiveness
MIL-R-22973 - Reliability Index Determination For Avionic Equipment Models, General Specification For
MIL-R-23094 - Reliability Assurance For Production Acceptance Of Avionic Equipment, General Specification For (S/S By Mil-Std 781)
MIL-R-24358 - Restoration Shipboard Electronic Equipment F, 1N And 2N Cognizance (S/S By Mil-Std-2110)
MIL-R-25703 - Reconnaissance Equipment, Selection Of Materials, Parts, And Procedures For Approval
MIL-R-25956 - Report, Nonmilitary Crystal Unit Specification
MIL-R-26260 - Rocket Research Vehicle Xrm&86
MIL-R-26273 - Radar Set An/Fps-63
MIL-R-27070 - Reliability Requirements For Development Of Ground Electronic Equipment (S/S By Mil-Std-785)
MIL-R-27430 - Receiving Set, Radio An-Arn&58 Bench, Preflight, And Flight Tests Of
MIL-R-27542 - Reliability Program For Systems, Subsystems And Equipment (S/S By Mil-Std 785
MIL-R-55231 - Reliability Requirements, General, For Production Electronic Equipment (S/S By Mil-Std-785)
MIL-R-55413 - Reliability Prediction And Demonstration For Airborne Surveillance System (Multipurpose) Mqm-58A
MIL-R-55611 - Report, Technical
MIL-R-6022 - Receiving Set, Radio, An/Arr-27A
MIL-R-82109 - Repair Parts Usage Data Reporting, General Specification For
MIL-R-82188 - Repair Parts Support During Service Test And Initial Period Of Operation, General Specification For
MIL-R-83313 - Reviews And Audits, Technical, For Communication-Electronic-Meteorological Systems And Related Equipment (See Notice 2 For Replacement Information)
MIL-R-978 - Reports: Research And Development (For Electronic Equipment) (S/S By Mil-Std-847)
MIL-S-008806 - Sound Pressure Levels In Aircraft, General Specification For (Future Procurement See Mil-Std-1789)
This specification covers the general requirements for maximum allowable sound pressure levels in aircraft crew and passenger compartments and the testing requirements for determining conformance to these levels.
MIL-S-10234 - Shutter Assembly, An/Gva&1( )
MIL-S-11459 - Spare Parts Data (Transportation Corps Equipment).
MIL-S-12348 - Suppression, Radio Interference General Requirements For Railway Rolling Stock, And Maintenance Of Way Equipment (S/S By Mil-Std-461)
MIL-S-13237 - Supression, Radio Interference Requirements For Watercraft (S/S By Mil-E-55301)
MIL-S-17640 - Shoe, Dress (Leather, Blucher, White) (Navy Nurses)
MIL-S-17724 - Sight, Illuminated Mark 20 Mod 4
MIL-S-17855 - Ship Instrumentation Manuals, Preparation, Contents And Approval
MIL-S-19019 - Semi Trailer Mark 11 Mod 0 (Hydraulic Lift)
MIL-S-19393 - Support, Waveguide Horn, For As-473/Asb-1
MIL-S-2040 - Specifications For Quartermaster Corps Maintenance Manuals End Parts Lists.
MIL-S-2265 - Syringe, Armored, Veterinary (Hog Cholera Type)
MIL-S-23603 - System Readiness/Maintainability, Avionic Systems Design, Genera Specification For (S/S By Mil-Std-471)
MIL-S-23747 - Screw-Thread, Modified, 60 Degrees Stub, Double (Use Mil-Std-1373)
MIL-S-24277 - Standarization Program For Ships Shipb Oard Systems And Equipments, Requirements For (Use Mil-Std-680)
MIL-S-24795 - Sensors, Temperature, Fiber Optic (Naval Shipboard Use) (S/S By Astm-F2362)
This specification covers single-channel, fiber optic temperature sensors (FOTS) for Naval shipboard use, but does not include the readout display.
MIL-S-24796 - Sensors, Absolute Pressure, Fiber Optic (Naval Shipboard Use)
MIL-S-25287 - Source Data For Aircraft And Allied Equipment To Support Nuclear Weapon Capabilities, General Preparation Of
MIL-S-25288 - Source Data For Allied Equipment Used With Fighter And Bomber Aircraft Carrying Nuclear Weapons, Detail Preparation Of
MIL-S-25292 - Source Data For Practice Bombs And Bomblets, Detail Preparation Of
MIL-S-25293 - Source Data For Bomb Trailers, Detail Preparation Of
MIL-S-2538 - Syringe Set, Metal
MIL-S-2541 - Stock, Equine
MIL-S-2556 - Sling, Horse
MIL-S-25793 - Specifications And Engineering Data For Environmental Control And Protection Systems For Air Vehicles,Instructions And Requirements For
MIL-S-2633 - Stopper, Rubber, For Vaccine Bottle (With Sleeve And Hollow Core).
MIL-S-26634 - Specifications, Weapon System, And Support System Mockups, Preparation Of
MIL-S-26640 - Specification, Electronic Support Systems, Preparation Of
MIL-S-26799 - Supply Test Support Table, Preparation Of
MIL-S-27074 - Scale Models, General Specification For
MIL-S-3350 - Syringe, Veterinary, (Dose, Metal)
MIL-S-38130 - Safety Engineering Of Systems And Associated Subsystems And Equipment, General Requirements For (S/S By Mil-Std 882)
MIL-S-38602 - Spray Tank, Agent, External A/B45Y-1
MIL-S-38603 - Shipping And Storage Container, Chemical Dispenser Cnu-75/E45
MIL-S-38711 - Screening Data To Be Furnished By Government Suppliers (Use Mil-P-84000)
MIL-S-4456 - Shock, Variable Duration, Method And Apparatus For (Use Mil-Std-202)
MIL-S-55556 - Specification, Preparation Of Installation And Acceptance Testing Of Electronics Equipment In Aircraft
This specification provides instructions and methods for the preparation of installation and test specifications for airborne electronic equipment intended for use in aircraft.
MIL-S-55612 - Selection Of Parts, Materials, And Processes Used In Electronic Equipment (Use Mil-P-11268)
MIL-S-5701 - Structural Criteria, Piloted Airplanes Definitions And Symbols (S/S By Mil-A-8860)
MIL-S-5707 - Structural Criteria, Piloted Airplanes Control Systems (S/S By Mil-A-8865)
MIL-S-5708 - Structural Criteria, Piloted Airplanes Armament (S/S By Mil-A-8860)
MIL-S-60723 - Spray Tank, Defoliant, Airplane, 80-Gal, M44
MIL-S-6090 - Steels Used In Aircraft Carburizing And Nitriding, Process For (S/S By Sae-Ams-S-6090)
MIL-S-8048 - Specifications, Aeronautical Weapon Systems, Preparation Of
MIL-S-81127 - Simulator, Launcher And Missile Mark 6 Mod 2
MIL-S-81398 - Standardization Program Plans (Use Milstd 680)
MIL-S-83576 - Solar Cells Arrays, Space Vehicle, Design And Testing, General Specification For
MIL-S-8577 - Searchlight Positive Carbon Control Modification Equipments For An/Avq-2 And An/Avq-2A Sets
MIL-S-9867 - Support Packages Preparation Of
MIL-STD-001303 - Painting Of Naval Ordnance Equipment
This standard covers materials, methods, and processes for paint systems approved for use in the painting and protection of various types of naval ordnance equipment and weapons against deterioration. The term ┬┐painting┬┐ is understood to include such preparatory treatments as cleaning, rust removal, surface treatments, filling, caulking, and the subsequent application of coating such as pretreatments, primers, final coats of paint, enamel, varnish, and other organic protective films. The paint systems described herein do not include color-coding or other data to identify the characteristics of weapons, equipment, components, or fillers. (References should be made to applicable standards, specifications, or drawings for color-codes to be used on specific items.)
MIL-STD-001591 - Command, Control And Communications (C3) System And Component Fault Diagnosis, Subsystems, Analysis/Synthesis Of
This standard establishes uniform criteria for conducting trade studies to determine the optimal design for command, control and communication systems and component fault diagnosis/isolation subsystems, hereafter referred to as Fault Identification & Test Subsystems (FITS).
MIL-STD-125 - Standard Guides For Preparation Of Item Descriptions (S/S By Fed-Std-5)
This standard prescribes minimum performance requirements for low-risk protection from mission-impacing damage or upset due to HEMP threat environments defined in DOD-STD-2169. This standard also addresses minimum testing requirements for demonstrating that prescribed performance has been achieved and for verifying that the installed protection subsystem provides the operationally required hardness for the completed facility.
MIL-STD-1260 - Uniform Cost Accounting And Reporting System (Ucars)
This standard prescribes principles for the accumulation, distribution and reporting of cost at GOCO ammunition plants.
MIL-STD-1280 - Keyboard Arrangements (S/S By Mil-Hdbk-1280)
This standard establishes the assignment of the 128 characters of the Military Standard Code for Information Interchange and 54 of the 57 "American" characters of USASCSOCR X3.17-1966 to keys in a typewriter-like keyboard arrangement for application where the textual information has a high alpha content.
MIL-STD-1281 - Internal Transient Control For Solid State Power Supplies
This standard covers the requirements and test limits for the determination, measurement and control of internal transients of solid state power supplies.
MIL-STD-1302 - Reports, Pump Design Evaluation For Naval Shipboard Centrifugal Pumps
This standard covers the requirements for the submission of manufacturer's design and engineering data, in the form of reports required in conjunction with the approval of pumps and release for fabrication of pumps or pump parts for each new design of pump, as specified in the applicable pump specification.
MIL-STD-1303 - Painting Of Naval Ordnance Equipment
This specification covers the requirements applicable to the design and construction of centrifugal pumps.
MIL-STD-1305 - Magnetoresistive Devices, Definitions, Letter Symbols, Color Code And Circuit Symbol For Part 1 Magnetoresistors
MIL-STD-1308 - Material Application And Processing Requirements
MIL-STD-1314 - Safety Precaution For Explosive Loaded Items (Use Dod Manual 4145.26M)
MIL-STD-1326 - Test Point, Test Point Selection And Interface Requirements For Equipments Monitored By Shipboard On-Line Automatic Test Equipment
MIL-STD-1340 - Fitting Out Procedures Ship Conversions And Modernizations (S/S By Mil-Std 1339)
MIL-STD-1345 - Test Requirements Document, Preparation Of
This standard establishes the requirements for the preparation and acceptanceof a Test Requirements Document(TRD) necessary for the specification, implementation, and maintenance of testing requirements for a system, subsystem, assembly, subassembly or Special Purpose Electronic Test Equipment.
MIL-STD-1351 - Replaceable Electronic Assembly Description And English Language Test Program Requirements
MIL-STD-1369 - Integrated Logistic Support Program Requirements
This document establishes the requirements, procedures and formats to be used for the development and documentation of an Integrated Logistic Support (ILS) Program.
MIL-STD-1375 - Provisioning, Initial Support, General Requirements For
This standard prescribes the procedures, formats, terms, and conditions governing the provisioning of end items of equipments.
ocircuits.MIL-M-38510/43 - Microcircuits, Digital, Ttl, Low Power, Priority Encoders, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon TTL, low power, priority encoders.
MIL-M-38510/44 - Microcircuits, Digital, Ttl, Low Power, Comparators, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon TTL, low power comparator microcircuits.
MIL-M-38510/440 - Microcircuits, Digital, Four Bit Microprocessor Slice Monolithic Silicon
This specification covers the detail requirements for a monolithic, silicon, TTL compatible four-bit microprocessor slice.
MIL-M-38510/441 - Microcircuits, Digital, Low Power Schottky Ttl, Bus Transceiver, Silicon
This specification covers the detail requirements for monolithic silicon, Schottky TTL bus transceiver microcircuits.
MIL-M-38510/442 - Microcircuits, Digital, Schottky, Ttl, D-Type Register, With Three-State Output, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, Schottky TTL, D-Type Register with three-state output microcircuits.
MIL-M-38510/45 - Microcircuits, Digital, Ttl, Low Power, Bistable Latches, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, TTL, low power, bistable latch microcircuits.
MIL-M-38510/46 - Microcircuits, Digital, Ttl, Low Power, Data Selectors/Multiplexers, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, TTL, logic microcircuits.
MIL-M-38510/460 - Microcircuits, Digital, Integrated Injection Logic (I2L), Parallel 16 Bit Microprocessor, Monolithic Silicon
This specification covers the detail requirments for a monolithic silicon, integrated injection logic (I2L), parallel 16-bit microprocessor.
MIL-M-38510/465 - Microcircuits, Digital, Integrated Injection Logic (I2L), Parallel 16- Bit Microprocessor, Monolithic Silicon
This specification covers the detail requirements for a monolithic silicon, integrated injection logic (I2L), parallel 16-bit microprocessor.
MIL-M-38510/470 - Microcircuits, Digital, Cmos Monolithic 8-Bit Microprocessor (Fixed Instructions)
This specification covers the detail requirements for a monolithic CMOS silicon gate microprocessor.
MIL-M-38510/471 - Microcircuits, Digital, Cmos/Sos 1024 Bit Random Access Memory (Ram) Monolithic Silicon
This specification covers the detail requirements for monolithic, silicon on sapphire, static, silicon gate CMOS 1024 bit random access memory microcircuits.
MIL-M-38510/472 - Microcircuit, Digital, Cmos, 512 Word X 8-Bit Static Read Only Memory (Rom) Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, silicon gate CMOS microcircuit.
MIL-M-38510/473 - Microcircuits, Digital, Cmos, Monolithic 8-Bit Input/Output Port
This specification covers the detail requirements for a monolithic silicon, silicon gate CMOS microcircuit.
MIL-M-38510/474 - Microcircuit, Digital, Cmos, Monolithic N-Bit One Of Eight Decoder
This specification covers the detail requirements for a monolithic silicon, silicon gate CMOS microcircuit.
MIL-M-38510/476 - Microcircuit, Digital, Cmos 4-Bit Bus Buffer/Separator, Monolithic Silicon
This specification covers the detail requirements for a monolithic silicon, silicon gate CMOS microcircuit.
MIL-M-38510/480 - Microcircuit, Digital, N-Channel, Silicon Gate, 8-Bit Microprocessor, Monolithic Silicon
This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor.
MIL-M-38510/481 - Microcircuit, Digital, N-Channel, Silicon Gate Monolithic Dual Serial Input/Output Controller
This specification covers the detail requirement for a monolithic N-channel, silicon gate dual serial input/output controller.
MIL-M-38510/482 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic Direct Memory Access Controller
This specification covers the detail requirements for a monolithic N-channel, silicon gate direct memory access controller.
MIL-M-38510/483 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic Counter/Timer Unit
This specification covers the detail requirements for a monolithic, N-channel, silicon gate counter/timer unit.
MIL-M-38510/484 - Microcircuits, Digital, N-Channel, Silicon Gate, Monolithic, Parallel Input/Output Controller
This specification covers the detail requirements for a monolithic N-channel, silicon gate, parallel input/output controller.
MIL-M-38510/490 - Microcircuits, Digital, N-Channel, Silicon Gate, Monolithic, 8-Bit Microcomputer
This specification covers the detail requirements for a monolithic N-channel, silicon gate microcomputer.
MIL-M-38510/5 - Microcircuits, Digital, Ttl, And-Or-Invert Gates, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, TTL, AND-OR-INVERT logic gating microcircuits. Two product assurance classes and a choice of case outlines/lead finish are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).
MIL-M-38510/50 - Microcircuits, Digital, Cmos, Nand Gates, Monolithic Silicon, Positive Logic
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/500 - Microcircuits, Digital Ttl, Multiplier Accumulators/Multipliers, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, multiplier accumulators and multiplier circuits. Two product assurance classes are reflected in the complete part number.
MIL-M-38510/502 - Microcircuits, Digital, Bipolar Field Programmable Logic Array (Fpla) 16 X 48 X 8, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, field programmable logic array (FPLA) microcircuits which employ thin film nichrome resistors (WICr) as the fusible link or programming element. Three product assurance classes and a choice of case outline/lead material and finish are provided for each type and are reflected in the complete part number.
MIL-M-38510/503 - Microcircuits, Digital, Bipolar, Programmable Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, programmable array logic microcircuits which employ titanium-tungsten resistors as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.
MIL-M-38510/504 - Microcircuits, Digital, Bipolar Programmable Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic microcircuits which employ titanium tungsten (TiW) resistors as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead materials and finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
MIL-M-38510/505 - Microcircuits, Digital, Bipolar Programmable Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic microcircuits which employ titanium tungsten resistors as the fusible link or programming element. Two product assurance classes (B and S) and a choice of case outlines and lead finishes are provided and are reflected in the complete part or identifying number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
MIL-M-38510/506 - Microcircuits, Digital, Bipolar, Programmable Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic microcircuits which employ titanium tungsten (Ti-W) as the fusible link or programming element. A choice of case outlines and lead materials and finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
MIL-M-38510/508 - Microcircuits, Memory, Digital, Cmos One-Time Programmable Array Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, programmable array logic microcircuits which employ a one-time programmable EPROM cell as the programming element. Two
MIL-M-38510/51 - Microcircuits, Digital, Cmos, Flip-Flops And Latchets, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/52 - Microcircuits, Digital, Cmos, Nor Gates, Monolithic Silicon, Positive Logic
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/520 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 16-Bit Microprocessor
This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor. One product assurance class (B) and a choice of case outline/lead finish are provided for each type, and are reflected in the complete part number.
MIL-M-38510/53 - Microcircuits, Digital, Cmos, Complimentary Pair Plus Inverter, And-Or-Select Exclusive Or Gates, Expandable 8-Input Gate Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/530 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 16-Bit Microprocessor (Fixed Instruction)
This specification covers the detail requirements for a monolithic NMOS, silicon gate microprocessor.
MIL-M-38510/54 - Microcircuits, Digital, Cmos, Positive Logic, Four-Bit Full Adder, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS logic microcircuits.
MIL-M-38510/540 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 16-Bit Microprocessor
This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor. Two product assurance classes and a choice of case outline/lead finish are provided for each type, and are reflected in the complete Part or Identifying Number (PIN).
MIL-M-38510/55 - Microcircuits, Digital, Cmos, Buffer/Converter, True/Compliment Buffer, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/555 - Microcircuits, Digital, Cmos, Remote Terminal Interface, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, remote terminal interface (RTI) microcircuits. One product assurance class (class B) and a choice of case outlines, and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/56 - Microcircuits, Digital, Cmos, Counters/Dividers, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/57 - Microcircuits, Digital, Cmos, Static Shift Register, Monolithic Silicon, Positive Logic
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/58 - Microcircuits, Digital, Cmos, Switches, Monolithic Silicon, Positive Logic
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
A-A-51595 - Catheter, Cardiovascular, Irrigation
A-A-51597 - Electrode, Electrocardiograph
This commercial item description covers a disposable pregelled electrocardiographic electrode suitable for cardiac monitoring.
A-A-51601 - Mask, Oronasal, Transparent
This Commercial Item Description covers an oronasal face mask with a one-way valve and head strap for mouth to mask resuscitation of a nonbreathing patient.
A-A-51602 - Canister Assembly, Suction, Surgical
This commercial item description covers a suction canister assembly for collecting fluids during surgery.
A-A-51603 - Resuscitator, Cardiopulmonary
This commercial item description covers a portable resuscitator suitable for emergency cardiopulmonary resuscitation in a variety of locations and during patient transport.
A-A-51605 - Adapter, Catheter-To-Luer Syringe, Tuohy
A-A-51612 - Suture, Absorbable, Surgical (Glycolide-Lactide Copolymer)
This commercial item description covers absorbable surgical sutures fabricated of glycolide-lactide copolymer and suitable for use in various surgical procedures.
A-A-51618 - Anoscope (Brinkerhoff)
A-A-51621 - Holder, Leg
A-A-51630 - Blood Sample, Collecting Set
A-A-51634 - Handle-Electrode, Electrosurgery
This commercial item description covers a disposable, pencil-type handle and electrode for use with an electrosurgical apparatus.
A-A-51636 - Syringe, Fluid Dispensing, 10 Ml (Pharmaceutical)
This commercial item description covers a spring loaded, 10 ml fluid dispensing syringe designed for dispensing of intravenous additives and unit dose fluids in the pharmacy.
A-A-51639 - Arch Supports
This commercial item description covers one type of lightweight orthotic arch support for patients experiencing discomfort and pain associated with stress to the anatomical structures of the foot caused by standing, walking, running and various athletic maneuvers.
A-A-51649 - Audiometer (Dual Channel)
This commercial item description covers a dual channel audiometer suitable for use in audiometric testing for air conduction, bone conduction and speech.
A-A-51654 - Tube, Tracheostomy, Disposable (Low Pressure Cuff, Shiley)
This commercial item description covers sterile, disposable, soft plastic, low pressure cuff tracheostomy tube, Shiley style, suitable for long term ventilation of tracheostomy patients who do not require high ventilation pressures.
A-A-51655 - Buttress, Suture (Polytetrafluoroethylene)
A-A-51656 - Electrosurgical Apparatus, (Portable)
This commercial item description covers a portable electrosurgical apparatus.
A-A-51671 - Introducer Set, Catheter, Percutaneous
A-A-51684 - Controller, Drop Rate, Intravenous Injection
This commercial item description covers a disposable controller, drop rate, intravenous injection, for use with 20 gage or larger hypodermic needles.
A-A-51690 - Mask, Oronsal (Plastic, Elongated)
This commercial item description covers a disposable, elongated oronasal oxygen mask.
A-A-51692 - Case, Needle And Blade
This commercial item description covers two sizes of sterile plastic cases suitable for the counting and disposal of suture needles and blades in a sterile field.
A-A-51694 - Stopcock, Arterial-Venous Pressure Monitoring (One-Way)
A-A-51695 - Retractor, Rectal (Hill-Ferguson)
This commercial item description covers a retractor of the Hill- Ferguson type, suitable for general surgical procedures.
A-A-51702 - Speculum, Septum (Cottle)
This commercial item description covers Cottle septum speculum for use in exposing the nasal canals.
A-A-51706 - Stethoscope, Es MIL-STD-1381 - Technical Electronic Terms And Definitions
MIL-STD-1399-101 - Interface Standard For Shipboard Systems Section 101 Cooling Water For Support Of Electronic Equipment (S/S By Dod-Std-1399-532)
MIL-STD-1399-103 - Interface Standard For Shipboard Systems Section 103 Electric Power, Alternating Current
MIL-STD-1399-104 - Interface Standard For Shipboard Systems Section 104 Potable Water Service (S/S By Dod-Std-1399, Section 533)
MIL-STD-1399-105 - Interface Standard For Shipboard Systems Section 105 Sea Water Service For Surface Ships
MIL-STD-1399-106 - Interface Standard For Shipboard Systems Section 106 Compressed Air Service For Surface Ships
MIL-STD-1399-408 - Interface Standard For Shipboard Systems Section 408 Electromagnetic Radiation Hazards To Personnel And Fuels
This section establishes interface requirements to prevent injury to personnel and accidental ignition of flammable volatile fuels which could occur onboard ship as a result of electromagnetic radiation.
MIL-STD-1399-409 - Interface Standard For Shipboard Systems Section 409 Electromagnetic Radiation Hazards To Ordnance
This section establishes interface requirements between the ship and shipboard ordinance containing electroexplosive devices to ensure compatibility of such shipboard ordnance with the electromagnetic radiation environment.
MIL-STD-1399-505 - Interface Standard For Shipboard Systems Section 505 Central Time And Frequency Support (S/S By Mil-Std-1399/441)
This section defines the standard interface requirements for, and the constraints on, the designof shipboard systems/equipment which will utilize the central time and frequency system.
MIL-STD-1399-702 - Interface Standard For Shipboard Systems Section 702 Synchro Data Transmission
MIL-STD-1406 - Retroreflectivity Test
MIL-STD-143 - Standards & Specifications, Order Of Precedence For The Selection Of (S/S By Mil-Std-970)
MIL-STD-1454 - Calorimetry For Thermal Battery Heat Sources Test And Calibration Procedures
This standard prescribes a method for testing thermal battery heat source powder samples for calorific values.
MIL-STD-1476 - Metric System Application In New Design
This standard covers the detailed requirements for employing the metric system of measurement in new design and in accompanying documentation.
MIL-STD-1513 - Trade Studies For The Selection Of Avionic Test Support Systems, Criteria For
MIL-STD-1517 - Phased Provisioning (S/S By Mil-Std-1388/1 And Mil-Std-1388/2)
This standard prescribes the procedures, terms, and conditions for phased provisioning of initial support items (spares and repair parts) to be furnished by contractors.
MIL-STD-1519 - Test Requirements Document, Preparation Of
MIL-STD-1528 - Manufacturing Management Program
MIL-STD-1536 - Integral Sensor Test System
MIL-STD-1552 - Provisioning Technical Documentation, Uniform Dod Requirements For (S/S By Mil-Std-1388-2)
MIL-STD-1555 - Aircrew Station Displays And Associated Equipment, Definitions Of
The purpose of this standard is to achieve standardization of the definitions listed herein which will eliminate major problems in effecting communications among the DOD services.
MIL-STD-1561 - Provisioning Procedures, Uniform Dod
This standard applies to all end items, including components and support items, procured by the Department of Defense for which provisioning is required when incorporated by reference to contracts which are executed in behalf of the United States of America.
MIL-STD-1567 - Work Measurement
MIL-STD-1574 - System Safety Program For Space And Missile Systems (S/S By Mil-Std-882)
MIL-STD-1577 - Intercontinental Ballistic Missile Systems Training/Training Equipment Management (S/S By Mil-Std-1379)
This standard defines the functions, roles and responsibilities of the Training and Training Equipment Division of the Human Factors Engineering and Management Team of the Intercontinental Ballistic Missiles Program Office (ICBM PO), Air Training Command (ATC), the Using Commands, Air Force Logistics Command (AFLC), and the contractor(s) to.
MIL-STD-1591 - On-Aircraft, Fault Diagnosis, Sub-Systems, Analysis/Synthesis Of
This standard establishes uniform criteria for conducting trade studies to determine the optimal design for an on-aircraft fault diagnosis/isolation system, hereafter referred to as the On-Board Built-In Test System (OBBIT).
MIL-STD-1600 - Reliability Predition Of Monolithic Integrated Circuits (See Mil-Hdbk 217)
MIL-STD-1602 - Progress Reports For Research And Development Equipment, Requirements For
MIL-STD-1604 - Technical And Maintenance Overhaul And Repair Standards, Preparation Of (S/S By Mil-M-24784/9)
The purpose of this standard is to delineate uniform requirements and criteria for the preparation of Technical and Maintenance Overhaul and Repair Standards (TRSs).
MIL-STD-1626 - Fitting Out Management Information System, General Requirements (S/S By Dod-Std-2186)
MIL-STD-1656 - Validation Plans For Naval Ordnance Overhaul And Repair Activities, Preparation Of
MIL-STD-167 - Mechanical Vibrations Of Shipboard Equipment (Replaced By Mil-Std-167-1 And Mil-Std-167-2)
This standard covers the requirement of most naval machinery and equipment as regards both internally excited vibrations, and externally imposed vibrations.
MIL-STD-1670 - Environmental Criteria And Guidelines For Air-Launched Weapons (S/S By Mil-Hdbk-1670)
This standard establishes guidelines for the environmental engineering required in support of air-launched weapon developments.
MIL-STD-1671 - Schematic Wiring Diagram (External Dc Power Connector, Aircraft)
MIL-STD-1681 - Fabrication, Welding, And Inspection Of Hy-130 Submarine Hull (See Notice 2 For Replacement Information)
MIL-STD-170 - Moisture Resistance Test Cycle For Ground Signal And Electronic Test Equipment (S/S By Mil-Std-810)
MIL-STD-173 - Systems For Painting And Finishing Artillery Materiel
MIL-STD-1763 - Aircraft/Stores Certification Procedures (S/S By Mil-Hdbk-1763)
MIL-STD-1771 - Value Engineering Program Requirements
This standard establishes the minimum requirements for a contractor's value engineering (VE) program and prescribes a minimum standard of contractor value engineering performance.
MIL-STD-180 - Photographic Equipment, Classification Of Visual And Mechanical Defects For
MIL-STD-1811 - Mass Properties Control For Space Vehicles (S/S By Mil-Hdbk-1811)
This standard establishes uniform procedures for the control, determination, and documentation of mass propeties of space vehicles and their subsystemmmms and components.
MIL-STD-1812 - Type Designation, Assignment And Method For Obtaining (S/S By Mil-Hdbk-1812)
MIL-STD-1843 - Reliability-Centered Maintenance For Aircraft, Engines And Equipment
MIL-STD-185 - Continuous Identification Marking Of Copper And Copper Base Alloys
MIL-STD-187 - Gear Tooth; Load Ratings
MIL-STD-188 - Military Communication System Technical Standards (S/S By Mil-Std-188/100 And Mil-Std-188/200)
The purpose of this standard is to provide technical design standards for military communications systems. These provide the basic technical parameters of communications equipment and systems. The parameters have been chosen for future state-of-the-art vakues wherever these can be determined with reasonable accuracy as well as to define the minimm acceptable performance values for interim use.
MIL-STD-188-116-4 - Interoperability Standards For Information And Record Traffic Exchange Mode Vi (S/S By Mil-Std-188/174)
MIL-STD-188-120 - Military Communication System Standards Terms And Definitions (S/S By Fed-Std-1037)
MIL-STD-188-124 - Grounding, Bonding And Shielding For Common Long Haul/Tactical
Communication Systems Including Ground Based Communications-Electronics Facilities and Equipments
MIL-STD-188-300 - Standards For Long Haul Communications System Design Standards Applicable To The Defense Communications System (See Mil-Std-188-100)
MIL-STD-188-310 - Subsystem Design And Engineering Standards For Technical Control Facilities (S/S By Mil-Std-188/154)
This standard establishes criteria for engineering fixed Technical Control Facilities and associated Patch and Test Facilities in the Department of Defense.
MIL-STD-188-313 - Subsystem Design And Engineering Standards And Equipment Technical Design Standards For Long-Haul Communications Transversing Microwave Los Radio And Tropospheric Scatter Radio
The purpose of this document is to provide technical design standards for subsystem and equipment performance for line-of-sight (LOS) radio transmission and Tropospheric Scatter radio transmission for use in Long Haul Communications.
MIL-STD-188-315 - Subsystem Design/Engineering & Equipment Technical Design Standards For Wire Systems
MIL-STD-188-317 - Subsystem Design And Engineering Standards And Equipment Technical Design Standards For High Frequency Radio
MIL-STD-188-322 - Subsystem Design/Engineering And Equipment Technical Design Standards For Long Haul Line Of Sight (Los) Digital Microwave Radio Transmission (S/S By Mil-Std-188-145)
The purpose of this document is to describe standards of performance and design for digital microwave radio links and radio equipment (herein after referred to as the "radio") for long haul line of sight (LOS) digital microwave transmission.
MIL-STD-188-341 - Non-Diversity Digital Data 2400 Bits Per Second (S/S By Mil-Std-188/110)
MIL-STD-188-344 - Non-Diversity Digital Data 1200 Bits Per Second (S/S By Mil-Std-188/110)
MIL-STD-204 - Thickness Of Sheet And Strip Metals
MIL-STD-205 - Frequencies For Electric Power
The purpose of this standard is to establish frequencies for alternating-currrent electric power.
MIL-STD-2076 - Unit Under Test Compatibility With Automatic Test Equipment General Requirements For
This standard contains requirements for design features which must be incorporated into equipment which is to be supported with Automatic Test Equipment (ATE).
MIL-STD-2078 - Requirement For Preparation Of Support Equipment Depot Level Rework Standards
This standard establishes the requirements for format and provides instruction for the preparation of SE depot level rework standards.
MIL-STD-2080 - Maintenance Plan Analysis For Aircraft And Ground Support Equipment
MIL-STD-2110 - Restoration, Overhaul, And Repair Of Electronic Equipment
MIL-STD-2111 - Technical Repair Standards - Electronic (2Z/4G/7Z/7G Repairables), Preparation Of (S/S By Mil-T-24747)
This standard covers Naval Electronic Systems Command requirements for the preparation of technical repair standards (TRS).
MIL-STD-2137 - Weight Control Technical Requirements For Surface Ships (S/S By Astm-F1808, Sawe-Rp12 And Sawe-Rp13)
This standard establishes the weight estimate and report content and procedures for all design phases of surface ship acquisition from preliminary design to detail design and construction.
MIL-STD-216 - Production Or Procurement Of Artwork For Technical Manuals (S/S By Mil-M-38784)
MIL-STD-243 - Type And Definition Of Models For Communication Electronic Equipment (Use Mil-Std 280)
MIL-STD-254 - Weight And Balance Data Reporting Forms For Aircraft (Asg) (S/S By Mil-Std-1374)
MIL-STD-255 - Electric Voltages Alternating And Direct Current
This standard covers nominal voltage ratings for alternating and direct electric current.
MIL-STD-27 - Designations For Electric Power Switchgear Devices & Industrial Control Devices (S/S Byansi C37.20)
MIL-STD-280 - Definitions Of Item Levels, Item Exchangeability, Models, And Related Terms (S/S By Mil-Hdbk-505)
The purpose of this standard is to establish standard teams and definitions to be used in describing the levels of military items and to designate and define items exchangeability, models, and other related terms. These terms apply to electrical, electronic, mechanical, pneumatic and hydraulic Military equipment.
MIL-STD-32 - Status Notes For Use On Military Sheet Form Standards (Use Mil-Std 962)
MIL-STD-35-1 - Automated Engineering Document Preparation System Materials (Use Mil-Std-35)
MIL-STD-35-2 - Automated Engineering Document Preparation System Finishes (Use Mil-Std-35)
MIL-STD-35-33 - Automated Engineering Document Preparation System, Packing And Packing Material
MIL-STD-35-47 - Automated Engineering Document Preparation System Valves (Non Powered), (Use Milstd-35-100)
MIL-STD-35-77 - Automated Engineering Document Preparation System, Vehicles, Commercial, Automobiles, Buses, Ambulances And Station Wagons
MIL-STD-35-92 - Trailer, Semitrailer, And Dollies, Tactical And Commercial
MIL-STD-399 - Microform Formats
This standard establishes formats for microforms produced by or for the Department of Defense.
MIL-STD-40000 - Parts Control Program For Nondevelopmental Items (Ndis) (S/S By Mil-Hdbk-402)
The purpose of this standard is to specify the requirements for conducting an effective parts control program in the acquisition of an NDI system from time of contract award and continuing through the operational (fielding) phase of the system.
MIL-STD-405 - Riveting, Rocket And Guided Missile Structural, Aluminum And Aluminum Alloy Blind Rivets, Mechanically Expanded Type
MIL-STD-415 - Test Provisions For Electronic Systems And Associated Equipment, Design Criteria For
This standard establishes design criteria for test provisions that permit the functional and static parameters of electronic sytems and associated equipment to be monitored, evaluated, or isolated .
MIL-STD-437 - X-Ray Standard For Bare Aluminum Alloy Electrode Welds
MIL-STD-440 - Soldering Techniques For Standard Type Solder Terminals (Use Mil-Std-454)
MIL-STD-443 - Rating Conditions For The Design Of Refrigeration And Air Conditioning Field Equipment
MIL-STD-446 - Enviromental Requirements For Electronic Parts
MIL-STD-447 - Definitions Of Interchangeable Substitute And Replacement Items
MIL-STD-448 - Tests For Construction, Industrial, And Materials Handling Equipment
This standard establishes tests that apply to the different types of construction, industrial, materials handling, and the auxiliary equipment and attachments thereto.
MIL-STD-451 - Weight And Balance Data Reporting Forms For Rotorcraft (S/S By Mil-Std-1374)
MIL-STD-456 - Electronic Parts, Date And Source Coding For (S/S By Mil-Std-1285)
MIL-STD-473 - Maintainability Verification/Demonstration/Evaluation For Aeronautical Systems (S/S By Mil-Std-471)
MIL-STD-499 - Engineering Management
This standard provides the program manager criteria for evaluating engineering planning and output.
MIL-STD-643 - Evaluation Of Contractor Quality Control Systems
MIL-STD-646 - Electrical Circuit (Wire Marking) Identification For Tactical Military Vehicles
This standard covers a method of identifying wires connecting components in electrical circuits of service vehicles based on wire end markings which identify the component and the terminal to which the wire end is connected.
MIL-STD-673 - Hole Numbering System-Perforated Paper Tape
MIL-STD-678 - Printer, Projection, Photographic
MIL-STD-680 - Standardization Program Requirements For Defense Acquisitions
This standard establishes requirements for planning and executing standardization programs in defense acquisitions.
MIL-STD-682 - Flow Chart Symbols For Automatic Data Processing Systems (Use American Standards Association Standard X3.5-1966)
MIL-STD-689 - Mobile Communications&Electronic Design Classes
MIL-STD-706 - Power Supply Voltages, Regulated, D.C. Within Electronic Equipment
MIL-STD-736 - Unitized Equipment Design
MIL-STD-743 - Cleaning And Protecting Piping For Hydraulic Power Transmission Equipment (S/S By Mil-Std-419)
MIL-STD-752 - Equipment Spectrum Signatures, Collection Standard For (Use Mil-Std-449)
MIL-STD-761 - Electric Power, Alternating Current For Shipboard Use, Characteristics And Utilization (Replaced By Mil-Std-1399)
MIL-STD-768-1 - Instructions For Repair Of Aircraft And Weapons Reinforced Plastic And Sandwich Structures, Part I, All Plastic Construction
MIL-STD-768-2 - Instructions For Repair Of Aircraft And Weapons Sandwich Structures, Part Ii, Metal Construction (Asg)
MIL-STD-775 - X-Ray Standards For Welding Electrode Qualification And Quality Conformance Test Welds (See Notice 1 For Replacement Information)
MIL-STD-778 - Maintainability Terms And Definitions (S/S By Mil-Std-721)
MIL-STD-782 - Reconnaissance/Mapping Data Marking
This standard establishes the dimensions, coding methods, quality of dot image, and number character positions for the code matrix block utilized in the Department of Defense Reconnaissance/Mapping Data Marking System.
MIL-STD-787 - Joint Optical Range Instrumentation Type Designation System
MIL-STD-788 - Test Requirements For Replenishment-At-Sea, Machinery And Equipment Installations, Tensioned Highline Stations With Electro-Hydraulic Or Electro-Mechanical Drives
MIL-STD-789 - Contractor Technical Information Coding Of Replenishment Parts (S/S By Mil-Prf-49506)
This Standard provides a procedure for obtaining: a. Contractor technical information regarding selected parts for contractor-furnished equipment B. Identification data needed to enable the Government to acquire such parts.
MIL-STD-796 - Chemical Cleaning Of Main And Auxiliary Boilers (Hydrochloric Acid Method
MIL-STD-798 - Nondestructive Testing, Welding, Quality Control, Material Control And Identification And Hi-Shock Test Requirements For Piping System Components For Naval Shipboard Use
This standard covers the requirments for nondestructive testing, welding, quality control and identification and HI shock for piping system components. It does not apply to primary side components of nuclear ships.
MIL-STD-800 - Procedure For Carbon Monoxide Detection And Control In Aircraft
MIL-STD-802 - Number, Aircraft Engines And Engine Cylinders, Combustion Chambers, Flame Tubes, Inner Liners, And Similar Items
This standard is intended to designate unambiguously the position of aircraft engines and components.
MIL-STD-803 - Human Engineering Design Criteria For Aerospace Systems And Equipment (Part 1 Aerospace System Ground Equipment) (S/S By Mil-Std-1472)
MIL-STD-803-1 - Human Engineering Design Criteria For Aerospace Systems And Equipment (Part 1 Aerospace System Ground Equipment) (S/S By Mil-Std-1472)
MIL-STD-803-2 - Human Engineering Design Criteria For Aerospace Systems And Equipment Part 2. Aerospace Vehicles And Vehicle Equipment (S/S By Mil-Std-1472)
MIL-STD-803-3 - Human Engineering Design Criteria For Aerospace Systems And Equipment Part 3. Aerospace Vehicles And Vehicle Equipment (S/S By Mil-Std-1472)
MIL-STD-806 - Graphical Symbols For Logic Diagrams (S/S By Ansi Y32.14-1973)
MIL-STD-829 - Terms And Definitions For Maintainability (Use Mil-Std-778)
MIL-STD-833 - Minimization Of Hazards Of Electromagnetic Radiation Of Electroexplosive Devices (S/S By Mil-Std-1512)
MIL-STD-841 - Marking Of Aircraft And Missile Propulsion System Parts Fabricated From Critical High Temperature Alloys
This document establishes physical item marking requirements for aircraft and missile propulsion system parts and assemblies fabricated from critical high temperature alloys.
MIL-STD-842 - Uniform Procedures For Type Designation And Item Identification (S/S By Mil-Std-1812)
MIL-STD-847 - Format Requirements For Scientific And Technical Reports Prepared By Or For The Department Of Defense (S/S Ansi Z39.18)
This standard establishes format requirements for scientific and technical reports, including the DD Form 1473, Report Documentation Page, prepared by or for the Departments and Agencies of the Department of Defense.
MIL-STD-859 - Standard Calibration Table For Aeronautical Pressure Measuring Equipment
This standard establishes the static pressure p in inches of mercury for values of pressure altitude H in geopotential feet to be used in the design and calibration of all aircraft equipment whose operation is a function of atmospheric pressure.
MIL-STD-864 - Support Equipment Functional Classification Categories
This standard was established to provide Government personnel and contractors with a means of comparing Support Equipment and Mission Equipment according to functional and technical characteristics.
MIL-STD-875 - Type Designation System For Aeronautical And Support Equipment (S/S By Mil-Std-1812)
The purpose of this standard is to provide a type designation system, and procedures for its use, for the Department of Defense to standardize the identification of Aeronautical and Support Equipment as defined herein.
MIL-STD-880 - Abbreviations For Use On Airborne Equipment (S/S By Mil-Std 738)
MIL-STD-881 - Work Breakdown Structures For Defense Materiel Items
This Standard presents direction for effectively preparing, understanding, and presenting a Work Breakdown Structure (WBS). It provides the framework for Department of Defense (DoD) Program Managers to define their program?╞s WBS and also to defense contractors in their application and extension of the contract?╞s WBS. Section 1 defines and describes the WBS. Section 2 provides instructions on how the WBS is applied as well as how to develop a Program WBS in the pre-award timeframe. Section 3 provides direction for developing and implementing a Contract WBS and Section 4 examines the role of the WBS in the post-award timeframe. This Standard also provides WBS definitions for specific defense materiel commodity systems in Appendices A through K. Appendix L addresses WBS elements that are common to all systems.
MIL-STD-885 - Procurement Data Packages (S/S/ By Dod-D-100 And Di-E-7031)
MIL-STD-890 - Environmental Control,Environmental Protection, & Engine Air Bleedsubsystem Performance & Design Requirementsanalyses (S/S By Mil-E-87145)
MIL-STD-891 - Contractor Parts Control And Standardization Program (Use Milstd-965)
MIL-STD-960 - Standards And Specifications For Application In Computer-Aided Design And Computer-Aided Manufacturing Systems
MIL-STD-965 - Parts Control Program (S/S By Mil-Hdbk-965)
The purpose of this standard is to establish the guidelines and requirements for implementation of a parts control progress.
MIL-T-10209 - Transmitter Group(An/Fra&)()
MIL-T-11308 - Treatment And Painting (For Construction And Engineering Equipment) (S/S By Mil-T-704)
MIL-T-12522 - Thermograph Ml-227-( )
MIL-T-14600 - Transmission-Differential (Cross Drive) Assembly For Carrier, Cargo, Amphibious, M76, Preparation For Shipment And Storage Of.
MIL-T-17113 - Tests, Shock, Vibration, And Inclination (For Electronic Equipment) General Specification
MIL-T-18303 - Test Procedures; Preproduction, Acceptance, And Life For Aircraft Electronic Equipment, Format For
This document establishes the format for the preparation of Design Approval, Preproduction, Acceptance, and Life Test Procedures required for the testing of Avionic Equipment.
MIL-T-21200 - Test Equipment For Use With Electronic And Electrical Equipment, General Specification For
MIL-T-22703 - Technical Manual, Maintenance Instructions (For Surface-Launched Guided Missiles)
MIL-T-23103 - Thermal Performance Evaluation, Airborne Electronic Equipment And Systems, General Requirement For (S/S By Mil-Std-2218)
This specification covers procedures for acquiring thermal performance data and evaluating the thermal performance of airborne electronic equipment and systems.
MIL-T-2318 - Thermometer, Incubator
MIL-T-23336 - Technical Directives (Letter Type) Preparation Of
MIL-T-2391 - Trocar, Horse
MIL-T-24309 - Technical Support Plan For Electronic Equipment (S/S By Mil-Std-1369, Mil-Std-1388/1, And Mil-Std-1388/2)
MIL-T-2540 - Table, Operating, Equine
MIL-T-2542 - Tester, Hoof
MIL-T-26673 - Test Program For Equipment, Contractor& Established
MIL-T-27785 - Track Data Insertion Group Oa-6886()/Fyq-9
MIL-T-28773 - Tape, Electrosensitive, Dry
MIL-T-3343 - Thermometer, Dairy
MIL-T-38626 - Tank, Spray, Dry Agent, A/B45Y-4
MIL-T-38722 - Tape, Electronic Data Processing, (Magnetic Oxide Coated, 1/2 Inch) Rca Types 381/382 Tape Stations
MIL-T-38723 - Tape, Electronic Data Processing (Magnetic Oxide-Coated, 1/2 Inch)
MIL-T-55458 - The Army Equipment Record System (Taers), Forms And Data For
MIL-T-82313 - Technical Publications Covering Training Devices (S/S By Mil-M-82376)
MIL-T-83696 - Technical Data, Explosives Hazard Classification, Development Of
MIL-T-9107 - Test Reports, Preparation Of
MIL-T-9887 - Technical Manuals. Commercial Technical Data (Missile-Space Systems)
MIL-U-25900 - Uniform Design Criteria For Airborne Electronic Equipment
MIL-V-17897 - Valves Automatic Regulating, Temperature Actuated, Shipboard Use (S/S By Mil-V-19772)
MIL-V-18042 - Vent Waxes, Foundry Mold
MIL-V-24474 - Value Engineering Program Requirements (Naval Ship Systems Command)
MIL-V-38352 - Value Engineering Prog(S/S/By Mil-Std-1771)
MIL-V-45201 - Value Analysis Of Ordnance Equipment
MIL-V-55051 - Value Engineering Of Signal Corps Equipment (Use Mil-V-38352)
MIL-W-12518 - Welding Of Homogeneous Armor, Metal-Arc, Manual, With Ferritic Electrodes (Use Mil-W-46086 For Reference)
MIL-W-27076 - Workmanship Standards For Ground Electronic And Associated Equipment (S/S By Mil-Std-454)
MIL-W-5067 - Washers; Spring Lock (S/S By Ff-W-84)
MIL-W-55135 - Same Number Inadvertently Assigned These Two Specs (Weaponsight Infrared 21 Jun 61 Fsc 5850 S/S By Mil-W-55145) (Scaleplates 31 Jul 61 Fsc 6625 S/S By Mil-S-55170)
MIL-W-82573 - Weapons System, Or Ordnance System, Integrated Maintenance Requirements Plans (Imrps) Development And Preparation Of (Use Mil-P-24534)
MIL-X-19847 - X- Ray Apparatus, Radiographic, Industrial, Portable, 120 To 250 Kvp Rating
MS15031 - Socket, Deck (For Metal Furniture)
MS17794 - Criteria, Jet Electrical Starting System, Dc
MS25245 - Connections, Input Power Airborne Electronic Equipment, 28-Volt Dc, 115-Volt Single-Phase Ac, Or 115/200 Volt 3-Phase Ac, Or Combinations (Asg)
MS25494 - Tool, Manual, Hydraulic, For Crimping Electric Wire Terminals
MS25497 - Instrument, Pilot, Flight, Basic Standard Arrangement For Helicopters (S/S By Ms-33572)
MS27726 - Integrated Wire Termination System For Use On Electrical Components (S/S By Mil-Std-1549)
MS28112 - ( Images) Instrument, Basic Standard Arrangement For Fixed Wing Aircraft
MS28911 - Turbine Engine Constant Current Starting System Wiring Diagram
MS33533 - Tolerances - Seamless Corrosion-Resistant Steel Tubing Round
MS33540 - ( Images) Safety Wiring And Cotter Pinning, General Practices For (S/S By Nasm33540)
MS33578 - Recesses, Cross, Low Torque Drive, Dimensions And Gage Dimensions For (Asg) (Use Ms 9006)
MS33586 - Metal, Definition Of And Protection For Dissimilar (Use Mil-Std-889)
MS35057 - Resistor, Fxd, Nonwire Wound (Accurate) (Type N15).
MS35253 - Support Ring
MS35402 - Lamp, Incandescent, Projection Mogul Prefocus, Base-Down
MS35718 - Connector, Receptacle (Bnc) Rfug-1098/U
MS35805 - Capacitor, Dry Dielectrolytic, Polarized, Style Ce33 (Use Mil-C-62/5)
MS35806 - Capacitor, Dry Electrolytic, Polarized, Style Ce42 (Use Mil-C-62/7)
MS90372 - Internal Thread Allowance Dimensions, Design Standard For
MS91398 - Crystal Unit, Quartz Cr-45/U
MS91418 - Mounts, Vibration, Cup-Type, Classes A & B, Coarse Thread (For Use With Electronic Equipment In Aircraft)
NAS1806THRUNAS1816 - Rivet, Hi-Shear, Flat Head, Interference Fit, Titanium Alloy - Sep 57 W/Dod Exceptions
NAS1906THRUNAS1916 - Rivet, Hi-Shear, 100 Degrees Head Interference Fit, Titanium Alloy
NAS363THRUNAS369 - Control, Rod & Tube Assembly, 5/16-24 Unf-3A Thread
NFPA325 - Fire Protection Guide On Hazardous Materials (Nfpa-325A, 325-M, 49, 491M, 704M)
O-C-104 - Calcium Chloride, Anhydrous, Technical Grade (S/S By O-C-105)
P-A-91 - Absorbent Material, Oil And Water, For Floors And Decks (S/S By P-S-865)
QPL-13857-2 - Impregnation Of Metal Castings
QPL-5456-2 - Pump, Engine Driven, Air
QPL-5635-2 - Vibrator, Aircraft Engine Starting
QPL-693-1 - Cement, Metallurgical, Air-Setting, High-Temperature
QPL-W-C-001574-1 - Cleaning Machine, For 1/2 Inch Magnetic Oxide Coated Electronic Data Processing Tape
QPL-W-D-001489-3 - Disk Pack, For Data Storage (Magnetic Recording, 14 Inch, Six Disks)
QQ-A-451 - Aluminum Ingots (No Superseding Doc.)
QQ-B-731 - Bronze, Manganese, And Manganese-Aluminum; Ingots (For Remelting) (S/S By Qq-C-523)
QQ-C-00400 - Copper-Base Alloy Centrifugal Castings (S/S By Qq-C-390)
QQ-M-161 - Metal, Antifriction, Castings And Ingots
RR-P-101 - Pan, Pudding, Corrosion-Resisting-Steel (Use Rr-P-54)
SD-11 - Directory Of Department Of Defense Participation On Non-Government Standards Technical Committees (Technical Committee Participation Database (Formerly Known As The Sd-11) Was Discontinued)
SD-12 - A Guide For Users Of The Acquisition Streamlining And Standardization Electronic Transfer System (Assets) And Document Feedback System (Dfs)
SD-13 - A Guide For User Group Administrators Of The Acquisition Streamlining And Standardization Electronic Transfer System (Assets)
SD-3 - Personnel Participating In Nato Standardization, A Guide For Dod
This guide provides the necessary background information for Department of Defense (DOD) personnel participating in standardization meetings of the North Atlantic Treaty Organization (NATO). If will assist these personnel by providing a quick reference on the organization of NATO, NATO procedures, security questions, emergency information, and preparations for NATO meetings of groups subordinate or related to the civil and military structure of the North Atlantic Council (NAC).
SD-4 - Status Of Standardization Projects
This publication is composed of four parts. The first part lists standardization projects in Federal Supply Class (FSC) sequence. The second part is in preparing activity symbol sequence. The third part lists, in FSC sequence, projects that propose cancellation of a standardization document. The fourth part lists, document title to project cross-reference in FSC sequence.
SD-7 - An Overview Of The Dod Parts Control Program
SD-8 - An Overview Of The Defense Standardization And Specification Program (Dssp)
SES2 - Standardization The Economics Of - 1984
SS-C-158 - Cements, Hydraulic Methods For Sampling, Inspection, And Testing (S/S By Fed-Std-158)
TT-C-00607 - Conditioner, Exterior, For Free Chalking Masonry Surfaces
UL916 - Energy Management Equipment
UU-T-00791 - Tubes, Map Storage
VV-L-791 - Lubricants, Liquid Fuels, And Related Products; Methods Of Inspection, Sampling, And Testing (S/S By Fed-Std-791)
W-B-001594 - Burster, Paper Forms
W-C-001574 - Cleaning Machine, For 1/2 Inch Magnetic Oxide Coated Electronic Data Processing Tape
W-C-001587 - Cleaning, Tape, Electronic Data Processing, Methods (Technical Requirements For)
W-D-001489 - Disk-Pack, For Data Storage (Magnetic Recording, 14-Inch, Six Disks)
W-D-001595 - Decollator, Paper Forms
W-L-131 - Lamp-Auxiliaries, Flourescent
W-U-546 - Units, Heating, Electric, Replacement (For Water Heaters, Ranges, And Hot-Plates) (S/S By W-C-586)
ZZ-H-481 - Hose, Oil And Gasoline, Suction And Discharge, Synthetic-Rubber, Wire-Stiffened.
ZZ-I-111 - Ice Bag, Helmet Shaped
ZZ-T-651 - Treads, Safety, Rubber (S/S By Rr-T-650)
ock, Variable Duration, Method And Apparatus For (Use Mil-Std-202)
MIL-S-55556 - Specification, Preparation Of Installation And Acceptance Testing Of Electronics Equipment In Aircraft
This specification provides instructions and methods for the preparation of installation and test specifications for airborne electronic equipment intended for use in aircraft.
MIL-S-55612 - Selection Of Parts, Materials, And Processes Used In Electronic Equipment (Use Mil-P-11268)
MIL-S-5701 - Structural Criteria, Piloted Airplanes Definitions And Symbols (S/S By Mil-A-8860)
MIL-S-5707 - Structural Criteria, Piloted Airplanes Control Systems (S/S By Mil-A-8865)
MIL-S-5708 - Structural Criteria, Piloted Airplanes Armament (S/S By Mil-A-8860)
MIL-S-60723 - Spray Tank, Defoliant, Airplane, 80-Gal, M44
MIL-S-6090 - Steels Used In Aircraft Carburizing And Nitriding, Process For (S/S By Sae-Ams-S-6090)
MIL-S-8048 - Specifications, Aeronautical Weapon Systems, Preparation Of
MIL-S-81127 - Simulator, Launcher And Missile Mark 6 Mod 2
MIL-S-81398 - Standardization Program Plans (Use Milstd 680)
MIL-S-83576 - Solar Cells Arrays, Space Vehicle, Design And Testing, General Specification For
MIL-S-8577 - Searchlight Positive Carbon Control Modification Equipments For An/Avq-2 And An/Avq-2A Sets
MIL-S-9867 - Support Packages Preparation Of
MIL-STD-001303 - Painting Of Naval Ordnance Equipment
This standard covers materials, methods, and processes for paint systems approved for use in the painting and protection of various types of naval ordnance equipment and weapons against deterioration. The term ┬┐painting┬┐ is understood to include such preparatory treatments as cleaning, rust removal, surface treatments, filling, caulking, and the subsequent application of coating such as pretreatments, primers, final coats of paint, enamel, varnish, and other organic protective films. The paint systems described herein do not include color-coding or other data to identify the characteristics of weapons, equipment, components, or fillers. (References should be made to applicable standards, specifications, or drawings for color-codes to be used on specific items.)
MIL-STD-001591 - Command, Control And Communications (C3) System And Component Fault Diagnosis, Subsystems, Analysis/Synthesis Of
This standard establishes uniform criteria for conducting trade studies to determine the optimal design for command, control and communication systems and component fault diagnosis/isolation subsystems, hereafter referred to as Fault Identification & Test Subsystems (FITS).
MIL-STD-125 - Standard Guides For Preparation Of Item Descriptions (S/S By Fed-Std-5)
This standard prescribes minimum performance requirements for low-risk protection from mission-impacing damage or upset due to HEMP threat environments defined in DOD-STD-2169. This standard also addresses minimum testing requirements for demonstrating that prescribed performance has been achieved and for verifying that the installed protection subsystem provides the operationally required hardness for the completed facility.
MIL-STD-1260 - Uniform Cost Accounting And Reporting System (Ucars)
This standard prescribes principles for the accumulation, distribution and reporting of cost at GOCO ammunition plants.
MIL-STD-1280 - Keyboard Arrangements (S/S By Mil-Hdbk-1280)
This standard establishes the assignment of the 128 characters of the Military Standard Code for Information Interchange and 54 of the 57 "American" characters of USASCSOCR X3.17-1966 to keys in a typewriter-like keyboard arrangement for application where the textual information has a high alpha content.
MIL-STD-1281 - Internal Transient Control For Solid State Power Supplies
This standard covers the requirements and test limits for the determination, measurement and control of internal transients of solid state power supplies.
MIL-STD-1302 - Reports, Pump Design Evaluation For Naval Shipboard Centrifugal Pumps
This standard covers the requirements for the submission of manufacturer's design and engineering data, in the form of reports required in conjunction with the approval of pumps and release for fabrication of pumps or pump parts for each new design of pump, as specified in the applicable pump specification.
MIL-STD-1303 - Painting Of Naval Ordnance Equipment
This specification covers the requirements applicable to the design and construction of centrifugal pumps.
MIL-STD-1305 - Magnetoresistive Devices, Definitions, Letter Symbols, Color Code And Circuit Symbol For Part 1 Magnetoresistors
MIL-STD-1308 - Material Application And Processing Requirements
MIL-STD-1314 - Safety Precaution For Explosive Loaded Items (Use Dod Manual 4145.26M)
MIL-STD-1326 - Test Point, Test Point Selection And Interface Requirements For Equipments Monitored By Shipboard On-Line Automatic Test Equipment
MIL-STD-1340 - Fitting Out Procedures Ship Conversions And Modernizations (S/S By Mil-Std 1339)
MIL-STD-1345 - Test Requirements Document, Preparation Of
This standard establishes the requirements for the preparation and acceptanceof a Test Requirements Document(TRD) necessary for the specification, implementation, and maintenance of testing requirements for a system, subsystem, assembly, subassembly or Special Purpose Electronic Test Equipment.
MIL-STD-1351 - Replaceable Electronic Assembly Description And English Language Test Program Requirements
MIL-STD-1369 - Integrated Logistic Support Program Requirements
This document establishes the requirements, procedures and formats to be used for the development and documentation of an Integrated Logistic Support (ILS) Program.
MIL-STD-1375 - Provisioning, Initial Support, General Requirements For
This standard prescribes the procedures, formats, terms, and conditions governing the provisioning of end items of equipments.
ocircuits.MIL-M-38510/43 - Microcircuits, Digital, Ttl, Low Power, Priority Encoders, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon TTL, low power, priority encoders.
MIL-M-38510/44 - Microcircuits, Digital, Ttl, Low Power, Comparators, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon TTL, low power comparator microcircuits.
MIL-M-38510/440 - Microcircuits, Digital, Four Bit Microprocessor Slice Monolithic Silicon
This specification covers the detail requirements for a monolithic, silicon, TTL compatible four-bit microprocessor slice.
MIL-M-38510/441 - Microcircuits, Digital, Low Power Schottky Ttl, Bus Transceiver, Silicon
This specification covers the detail requirements for monolithic silicon, Schottky TTL bus transceiver microcircuits.
MIL-M-38510/442 - Microcircuits, Digital, Schottky, Ttl, D-Type Register, With Three-State Output, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, Schottky TTL, D-Type Register with three-state output microcircuits.
MIL-M-38510/45 - Microcircuits, Digital, Ttl, Low Power, Bistable Latches, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, TTL, low power, bistable latch microcircuits.
MIL-M-38510/46 - Microcircuits, Digital, Ttl, Low Power, Data Selectors/Multiplexers, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, TTL, logic microcircuits.
MIL-M-38510/460 - Microcircuits, Digital, Integrated Injection Logic (I2L), Parallel 16 Bit Microprocessor, Monolithic Silicon
This specification covers the detail requirments for a monolithic silicon, integrated injection logic (I2L), parallel 16-bit microprocessor.
MIL-M-38510/465 - Microcircuits, Digital, Integrated Injection Logic (I2L), Parallel 16- Bit Microprocessor, Monolithic Silicon
This specification covers the detail requirements for a monolithic silicon, integrated injection logic (I2L), parallel 16-bit microprocessor.
MIL-M-38510/470 - Microcircuits, Digital, Cmos Monolithic 8-Bit Microprocessor (Fixed Instructions)
This specification covers the detail requirements for a monolithic CMOS silicon gate microprocessor.
MIL-M-38510/471 - Microcircuits, Digital, Cmos/Sos 1024 Bit Random Access Memory (Ram) Monolithic Silicon
This specification covers the detail requirements for monolithic, silicon on sapphire, static, silicon gate CMOS 1024 bit random access memory microcircuits.
MIL-M-38510/472 - Microcircuit, Digital, Cmos, 512 Word X 8-Bit Static Read Only Memory (Rom) Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, silicon gate CMOS microcircuit.
MIL-M-38510/473 - Microcircuits, Digital, Cmos, Monolithic 8-Bit Input/Output Port
This specification covers the detail requirements for a monolithic silicon, silicon gate CMOS microcircuit.
MIL-M-38510/474 - Microcircuit, Digital, Cmos, Monolithic N-Bit One Of Eight Decoder
This specification covers the detail requirements for a monolithic silicon, silicon gate CMOS microcircuit.
MIL-M-38510/476 - Microcircuit, Digital, Cmos 4-Bit Bus Buffer/Separator, Monolithic Silicon
This specification covers the detail requirements for a monolithic silicon, silicon gate CMOS microcircuit.
MIL-M-38510/480 - Microcircuit, Digital, N-Channel, Silicon Gate, 8-Bit Microprocessor, Monolithic Silicon
This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor.
MIL-M-38510/481 - Microcircuit, Digital, N-Channel, Silicon Gate Monolithic Dual Serial Input/Output Controller
This specification covers the detail requirement for a monolithic N-channel, silicon gate dual serial input/output controller.
MIL-M-38510/482 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic Direct Memory Access Controller
This specification covers the detail requirements for a monolithic N-channel, silicon gate direct memory access controller.
MIL-M-38510/483 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic Counter/Timer Unit
This specification covers the detail requirements for a monolithic, N-channel, silicon gate counter/timer unit.
MIL-M-38510/484 - Microcircuits, Digital, N-Channel, Silicon Gate, Monolithic, Parallel Input/Output Controller
This specification covers the detail requirements for a monolithic N-channel, silicon gate, parallel input/output controller.
MIL-M-38510/490 - Microcircuits, Digital, N-Channel, Silicon Gate, Monolithic, 8-Bit Microcomputer
This specification covers the detail requirements for a monolithic N-channel, silicon gate microcomputer.
MIL-M-38510/5 - Microcircuits, Digital, Ttl, And-Or-Invert Gates, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, TTL, AND-OR-INVERT logic gating microcircuits. Two product assurance classes and a choice of case outlines/lead finish are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).
MIL-M-38510/50 - Microcircuits, Digital, Cmos, Nand Gates, Monolithic Silicon, Positive Logic
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/500 - Microcircuits, Digital Ttl, Multiplier Accumulators/Multipliers, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, multiplier accumulators and multiplier circuits. Two product assurance classes are reflected in the complete part number.
MIL-M-38510/502 - Microcircuits, Digital, Bipolar Field Programmable Logic Array (Fpla) 16 X 48 X 8, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, field programmable logic array (FPLA) microcircuits which employ thin film nichrome resistors (WICr) as the fusible link or programming element. Three product assurance classes and a choice of case outline/lead material and finish are provided for each type and are reflected in the complete part number.
MIL-M-38510/503 - Microcircuits, Digital, Bipolar, Programmable Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, programmable array logic microcircuits which employ titanium-tungsten resistors as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.
MIL-M-38510/504 - Microcircuits, Digital, Bipolar Programmable Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic microcircuits which employ titanium tungsten (TiW) resistors as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead materials and finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
MIL-M-38510/505 - Microcircuits, Digital, Bipolar Programmable Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic microcircuits which employ titanium tungsten resistors as the fusible link or programming element. Two product assurance classes (B and S) and a choice of case outlines and lead finishes are provided and are reflected in the complete part or identifying number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
MIL-M-38510/506 - Microcircuits, Digital, Bipolar, Programmable Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic microcircuits which employ titanium tungsten (Ti-W) as the fusible link or programming element. A choice of case outlines and lead materials and finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
MIL-M-38510/508 - Microcircuits, Memory, Digital, Cmos One-Time Programmable Array Logic, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, programmable array logic microcircuits which employ a one-time programmable EPROM cell as the programming element. Two
MIL-M-38510/51 - Microcircuits, Digital, Cmos, Flip-Flops And Latchets, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/52 - Microcircuits, Digital, Cmos, Nor Gates, Monolithic Silicon, Positive Logic
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/520 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 16-Bit Microprocessor
This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor. One product assurance class (B) and a choice of case outline/lead finish are provided for each type, and are reflected in the complete part number.
MIL-M-38510/53 - Microcircuits, Digital, Cmos, Complimentary Pair Plus Inverter, And-Or-Select Exclusive Or Gates, Expandable 8-Input Gate Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/530 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 16-Bit Microprocessor (Fixed Instruction)
This specification covers the detail requirements for a monolithic NMOS, silicon gate microprocessor.
MIL-M-38510/54 - Microcircuits, Digital, Cmos, Positive Logic, Four-Bit Full Adder, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS logic microcircuits.
MIL-M-38510/540 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 16-Bit Microprocessor
This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor. Two product assurance classes and a choice of case outline/lead finish are provided for each type, and are reflected in the complete Part or Identifying Number (PIN).
MIL-M-38510/55 - Microcircuits, Digital, Cmos, Buffer/Converter, True/Compliment Buffer, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/555 - Microcircuits, Digital, Cmos, Remote Terminal Interface, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, remote terminal interface (RTI) microcircuits. One product assurance class (class B) and a choice of case outlines, and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/56 - Microcircuits, Digital, Cmos, Counters/Dividers, Monolithic Silicon
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/57 - Microcircuits, Digital, Cmos, Static Shift Register, Monolithic Silicon, Positive Logic
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
MIL-M-38510/58 - Microcircuits, Digital, Cmos, Switches, Monolithic Silicon, Positive Logic
This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).
A-A-51595 - Catheter, Cardiovascular, Irrigation
A-A-51597 - Electrode, Electrocardiograph
This commercial item description covers a disposable pregelled electrocardiographic electrode suitable for cardiac monitoring.
A-A-51601 - Mask, Oronasal, Transparent
This Commercial Item Description covers an oronasal face mask with a one-way valve and head strap for mouth to mask resuscitation of a nonbreathing patient.
A-A-51602 - Canister Assembly, Suction, Surgical
This commercial item description covers a suction canister assembly for collecting fluids during surgery.
A-A-51603 - Resuscitator, Cardiopulmonary
This commercial item description covers a portable resuscitator suitable for emergency cardiopulmonary resuscitation in a variety of locations and during patient transport.
A-A-51605 - Adapter, Catheter-To-Luer Syringe, Tuohy
A-A-51612 - Suture, Absorbable, Surgical (Glycolide-Lactide Copolymer)
This commercial item description covers absorbable surgical sutures fabricated of glycolide-lactide copolymer and suitable for use in various surgical procedures.
A-A-51618 - Anoscope (Brinkerhoff)
A-A-51621 - Holder, Leg
A-A-51630 - Blood Sample, Collecting Set
A-A-51634 - Handle-Electrode, Electrosurgery
This commercial item description covers a disposable, pencil-type handle and electrode for use with an electrosurgical apparatus.
A-A-51636 - Syringe, Fluid Dispensing, 10 Ml (Pharmaceutical)
This commercial item description covers a spring loaded, 10 ml fluid dispensing syringe designed for dispensing of intravenous additives and unit dose fluids in the pharmacy.
A-A-51639 - Arch Supports
This commercial item description covers one type of lightweight orthotic arch support for patients experiencing discomfort and pain associated with stress to the anatomical structures of the foot caused by standing, walking, running and various athletic maneuvers.
A-A-51649 - Audiometer (Dual Channel)
This commercial item description covers a dual channel audiometer suitable for use in audiometric testing for air conduction, bone conduction and speech.
A-A-51654 - Tube, Tracheostomy, Disposable (Low Pressure Cuff, Shiley)
This commercial item description covers sterile, disposable, soft plastic, low pressure cuff tracheostomy tube, Shiley style, suitable for long term ventilation of tracheostomy patients who do not require high ventilation pressures.
A-A-51655 - Buttress, Suture (Polytetrafluoroethylene)
A-A-51656 - Electrosurgical Apparatus, (Portable)
This commercial item description covers a portable electrosurgical apparatus.
A-A-51671 - Introducer Set, Catheter, Percutaneous
A-A-51684 - Controller, Drop Rate, Intravenous Injection
This commercial item description covers a disposable controller, drop rate, intravenous injection, for use with 20 gage or larger hypodermic needles.
A-A-51690 - Mask, Oronsal (Plastic, Elongated)
This commercial item description covers a disposable, elongated oronasal oxygen mask.
A-A-51692 - Case, Needle And Blade
This commercial item description covers two sizes of sterile plastic cases suitable for the counting and disposal of suture needles and blades in a sterile field.
A-A-51694 - Stopcock, Arterial-Venous Pressure Monitoring (One-Way)
A-A-51695 - Retractor, Rectal (Hill-Ferguson)
This commercial item description covers a retractor of the Hill- Ferguson type, suitable for general surgical procedures.
A-A-51702 - Speculum, Septum (Cottle)
This commercial item description covers Cottle septum speculum for use in exposing the nasal canals.
A-A-51706 - Stethoscope, Es
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business